Hello Richard, my private e-mail is [EMAIL PROTECTED] please send me a note there.
-----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Richard Pinion Sent: Friday, March 03, 2006 10:17 AM To: [email protected] Subject: Re: Linux IPL Also, do you work for Blue Blue Sheild of Louisiana? I worked there for 2 years back in 1981 as a system programmer. >>> [EMAIL PROTECTED] 3/3/2006 10:39 AM >>> I am in the process of doing an install of Marist Linux in an LPAR. It is not possible to use a tape IPL so I searched the internet and found a procedure that I believe originated at SUSE. This procedure is a boot program which is assembled, installed on DASD and followed by the 3 IPL files which normally go on tape. I substituted the Marist files for the SUSE files. I adjusted the space info in the JCL to accomodate the larger image file. The program to install the files to DASD finished with rc=0 but the subsequent IPL shows a PSW loop. I suspect that I need to use the SUSE tape IPL files to make this work. However, I would be grateful to anyones for advise. TIA ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
