Thanks for the reply,
This morning I sent an email to Fundamental Software on this issue.
I also went thru the Technical Overview at T3 Technologies and it only
goes up to 3490's tape drive.
I have another question, If I am using the STK SILO and the database is
on an REAL 3390 DASD, shared with other z/OS.
Is this an issue?
David Boyes
<[EMAIL PROTECTED]
e.net> To
Sent by: Linux on [email protected]
390 Port cc
<[EMAIL PROTECTED]
ist.edu> Subject
Re: FLEX-ES
04/06/2006 10:00
AM
Please respond to
Linux on 390 Port
<[EMAIL PROTECTED]
ist.edu>
> Is possible to connect 3590 tape drives to a FLEX-ES system ? If so,
can
> it also be attached to STK 9840 tape draives as well?
If you have ESCON adapters on the drives and ESCON adapters in the Flex
box, sure. I also think that Flex will support the SCSI 3590s but
haven't tried this. I don't think Flex supports FICON yet (or at least I
haven't heard anything about it...)
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
-----------------------------------------
This message and its attachments may contain privileged and
confidential information. If you are not the intended recipient(s),
you are prohibited from printing, forwarding, saving or copying this
email. If you have received this e-mail in error, please immediately
notify the sender and delete this e-mail and its attachments from your
computer.
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
