Have you actually configured the device online to the Linux LPAR?
Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of Fuhrmann Anna Sent: Wednesday, April 12, 2006 7:12 AM To: [email protected] Subject: adding a qeth device Hi dear List, I am about to add a hipersocket device to our Linux RHEL4 LPAR/z-series. The driver documentation suggests: echo <read_device_bus_id>,<write_device_bus_id>,<data_device_bus_id> > /sys/bus/ccwgroup/drivers/qeth/group But this command does not do anything visible, the file "group" keeps being empty - and when listing the directory "qeth", I get the following result: [EMAIL PROTECTED] qeth]# ls -la /sys/bus/ccwgroup/drivers/qeth total 0 drwxr-xr-x 2 root root 0 Apr 11 13:55 . drwxr-xr-x 3 root root 0 Mar 9 10:19 .. lrwxrwxrwx 1 root root 0 Apr 11 13:55 0.0.0408 -> ../../../../devices/qeth/0.0.0408 --w----r-- 1 root root 0 Apr 12 12:57 group --w------- 1 root root 4096 Apr 11 13:55 notifier_register That is: the first device, an OSA-card, is a symbolic link directly under .../qeth/. So I suppose the echo command should nont contain "group". Is this a documentation mistake or am I just too much of a beginner? thanks, Anna ~~ Dr. Anna Fuhrmann ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
