Mike,
The last few lines in my SLES9 version of /etc/modprobe.conf say:
<snip>
# end of s390 part for modprobe.conf
# please keep this at the end and add local modifications to
modules.conf.local
include /etc/modprobe.conf.local
Consequently, that's where I put mine. :-)
Best regards,
Mark Wheeler
3M Company
Mike Lovins
<[EMAIL PROTECTED]
.ok.us> To
Sent by: Linux on [email protected]
390 Port cc
<[EMAIL PROTECTED]
IST.EDU> Subject
Re: SuSE8 to SuSE9
05/11/2006 03:16
PM
Please respond to
Linux on 390 Port
<[EMAIL PROTECTED]
IST.EDU>
Mark,
Thanks for the response but I found out what the script is
(/sbin/generate-modprobe.conf | tee /etc/modprobe.conf). I had to ftp my
prior Linux modules.conf file to the SuSE9 system and the run the
script. It appears to have worked, (as best that I can tell at this
point). We are running Linux on a IBM z800 processor. The items I was
wanting to convert was the definitions for my IBM 3485 tape library.
Again thanks.............
>>> [EMAIL PROTECTED] 05/11/06 2:53 PM >>>
I doubt you would need (or even _want_) to run a script to do this.
What do the current contents of modules.conf look like?
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Mike Lovins
Sent: Wednesday, May 10, 2006 4:54 PM
To: [email protected]
Subject: SuSE8 to SuSE9
Can someone give me some direction? I have installed SuSE9 on a new
system and I currently have SuSE8.1 on another system that I want to
migrate my applications to the new system. For one of the applications
I
need to convert my /etc/modules.conf file. I have noticed that
/etc/modules.conf is nolonger used in SuSE9, it is now
/etc/modprobe.conf. IBM keeps telling me that there is a script to run
but does not elaberate on what the command should look like to convert
my modules.conf to the new file. Can someone help me in this respect.
Thank,
Mike Lovins
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390
or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
