I found the s390_oco-2.6.5-7.145.s390x.rpm on the Novell site. Rpm -qpi says this is the module to access the 3590 tape. Do you know if it will also read a 3480 tape? I'm on kernel 2.6.5-7.244 (SP3). I'm trying to find an IBM driver for 3480 drives for SLES9 SP3. Betsie
-----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Post, Mark K Sent: Thursday, June 08, 2006 10:07 AM To: [email protected] Subject: Re: HLASM on zLinux install Attach the tape drive to the guest and see if it has a tar archive on it? Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Spann, Elizebeth (Betsie) Sent: Thursday, June 08, 2006 11:42 AM To: [email protected] Subject: HLASM on zLinux install Has anyone installed HLASM for Linux on zSeries yet? The product is shipped on a 3480 tape and I can't figure out how to process it off the tape. The README for the installation is G210-2407 and costs $1.20 online. (I don't know how long it will take to get the pub shipped.) IBM has taken an ETR for the problem but whoever owns the README has not yet responded. I've tried TAPE, VMFPLC2 and DDR. Any ideas? Betsie ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
