I think you are right Mark. It needs to be a trunc port. Thanks to everyone for the discussion and advice!!!! Rob ----- Original Message ----- From: "Post, Mark K" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, July 28, 2006 5:14 PM Subject: Re: /proc/qeth for VSwitch
If I'm remembering correctly, the main difference is that your OSA needs to be connected to a trunk port on the external switch when using an Ethernet VSwitch. Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Rob Schwartz Sent: Friday, July 28, 2006 5:05 PM To: [email protected] Subject: Re: /proc/qeth for VSwitch Well I realize that... haha.. I'm wondering how CONNECTING to a IP vs Ethernet VSwitch differs.. I am able to connect to this VSwitch: q vswitch boswitcx details VSWITCH SYSTEM BOSWITCX Type: VSWITCH Connected: 0 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware State: Defined IPTimeout: 5 QueueStorage: 8 Ready; T=0.01/0.01 17:02:43 I am UNable to connect to this VSwitch: q vswitch boswitch details VSWITCH SYSTEM BOSWITCH Type: VSWITCH Connected: 1 Maxconn: INFINITE PERSISTENT RESTRICTED ETHERNET Accounting: OFF VLAN Unaware State: Ready QueueStorage: 8 Portname: PORT0 RDEV: 0E86 Controller: TCPIP VDEV: 0E86 VSWITCH Connection: RX Packets: 0 Discarded: 0 Errors: 0 TX Packets: 0 Discarded: 0 Errors: 0 RX Bytes: 0 TX Bytes: 0 Device: 0E88 Unit: 002 Role: DATA Adapter Owner: LTROB NIC: 3F04 Name: UNASSIGNED RX Packets: 0 Discarded: 0 Errors: 0 TX Packets: 0 Discarded: 0 Errors: 0 RX Bytes: 0 TX Bytes: 0 Device: 3F06 Unit: 002 Role: DATA ----- Original Message ----- From: "Post, Mark K" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, July 28, 2006 4:59 PM Subject: Re: /proc/qeth for VSwitch Layer 2 versus layer 3. Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Rob Schwartz Sent: Friday, July 28, 2006 4:54 PM To: [email protected] Subject: Re: /proc/qeth for VSwitch I got this to work using a IP VSwitch. All I changed was the name of the VSwitch. /proc/qeth shows as a Guest LAN... Anyone get a Ethernet VSwitch to work? I wonder what the difference is between Ethernet and IP VSwitches? ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
