CTCs are not QDIO devices, but thanks anyway. (And I already checked, besides. It is off.)
Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Nilson Vieira Sent: Tuesday, August 01, 2006 1:37 PM To: [email protected] Subject: Re: SLES10 Abend During Install Try ' set QIOASSIST off' on the Virtual Machine Profile. I hope that help´s ----- Original Message ----- From: "Post, Mark K" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, August 01, 2006 2:20 PM Subject: SLES10 Abend During Install I have a z/VM 4.4 64-bit guest on a z900 that I'm trying to install SLES10 GA on. Things seem to go along fine, until I SSH in and start YaST. At that point, I get a the following messages on my terminal, followed by a kernel panic on the z/VM console: # yast *** Starting YaST2 *** (-- fairly long pause ---) *** Preparing SSH installation for reboot *** *** NOTE: after reboot, you have to reconnect and call *** *** /usr/lib/YaST2/startup/YaST2.ssh *** illegal operation: 0001 [#1] CPU: 0 Not tainted Process init (pid: 1, task: 00000000007c1748, ksp: 00000000007c3ca0) Krnl PSW : 0704200180000000 0000000000000002 (0x2) Krnl GPRS: 0000000000000001 0000000000000000 0000000003cdb2a8 0000000000000085 00000000007c3cf0 0000000000000001 00000000010c6160 0000000000000001 0000000003cdb3c8 00000000000a3898 0000000003cdb3c8 0000000000000000 0000000000000085 0000000000446888 000000000025970c 00000000007c3b38 Krnl Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Call Trace: ([<0000000000259434>] mpage_writepages+0x23c/0xb40) [<00000000001b07ca>] do_writepages+0x5a/0x74 [<0000000000256a8c>] sync_inodes+0x540/0x1204 [<00000000001fdad4>] sys_sync+0x30/0x84 [<000000000010f774>] sysc_noemu+0x10/0x16 [<00000200001464aa>] 0x200001464aa <0>Kernel panic - not syncing: Attempted to kill init! HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 0014259E Q CPLEVEL z/VM Version 4 Release 4.0, service level 0403 (64-bit) Generated at 11/19/04 15:43:15 CDT IPL at 04/09/06 04:13:05 CDT Q STOR STORAGE = 256M My network connections are via CTC to the z/VM TCP/IP SVM. (Which is no longer officially supported in SLES, unfortunately. There's also a bug in the installer regarding CTCs, but I doubt I'll be reporting the issue because of that.) Anyone have any ideas about this one? It looks like a S0C1 (illegal opcode), but I don't know what might be causing it. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
