I am working on SLES9 SP3 s390x under zVM 5.2 trying to migrate from ECKD to zFCP/SCSI.
Has anyone setup the '/' root filesystem to be multipath-tools and LVM with SLES9 SP3 ? I have setup three SCSI devices. One for /boot, one for the '/' filesystem, and a third one with individual LVM filesystems. /boot is it's own small SCSI device. I have the main '/' filesystem as a separate SCSI multipath/lvm device (/bin , /sbin, /dev, /etc, /mnt, /proc, /root, /srv, /sys, /lib, /lib64) These directories are on another SCSI device multipath-tools device with individual LVM filesystems: (/opt, /home, /usr, /tmp, /var). I get this message during the SCSI IPL: ------------------------------------------------------------------------------------ Reading all physical volumes. This may take a while... Found volume group "datavg" using metadata type lvm2 Found volume group "rootvg" using metadata type lvm2 Unable to find volume group "rootvgx" Waiting for device /dev/rootvgx/root to appear: . . . . . .not found -- device nodes: console dasda dasda1 dasda2 dasda3 dasdb dasdb1 device-mapper disk full kmem kms loop5 loop6 loop7 mapper md0 mem null port ptmx ram ram0 ram1 ram10 ram11 ram12 m4 ram5 ram6 ram7 ram 8 ram9 ramdisk random scsi sda sdb sdc sdd sde sdf sdg sdh sdi sdj sdk sdl sdm s S0 ttysclp0 urandom zero zfcp_cfdc No root device found; exiting to /bin/sh sh: can't access tty; job control turned off $ -------------------------------------------------------------------------------- TIA .......................... Regards, Terry L. Spaulding IBM ITS [EMAIL PROTECTED] ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
