On 8/13/06, Waite, Dick <[EMAIL PROTECTED]> wrote:
Grand Afternoon,I'm running 3 S390X machines on SuSE SLE 10.0, they have been running on z/VM 5.1 for quite a long time, they ran well and happy with their file system on FCP SCSI. Wd are talking EXT3 FS We switched yesterday to z/VM 5.2 and now the SLE 10.0 machines are very unhappy with the FCP SCSI disks. The SuSE SLES 9.3 machines, on the same SCSI's are happy, no issues seen so far. Has anyone got SuSE SLE 10.0 using FCP on z/VM 5.2 running happy chappie SCSI's sd 0:0:0:0: SCSI error: return code = 0x10000 end_request: I/O error, dev sda, sector 3495302 sd 0:0:0:0: SCSI error: return code = 0x10000 end_request: I/O error, dev sda, sector 3495310 sd 0:0:0:0: SCSI error: return code = 0x10000 end_request: I/O error, dev sda, sector 3495318 sd 0:0:0:0: SCSI error: return code = 0x10000 end_request: I/O error, dev sda, sector 3495310 sd 0:0:0:0: SCSI error: return code = 0x10000 end_request: I/O error, dev sda, sector 3495310 sd 0:0:0:0: SCSI error: return code = 0x10000 end_request: I/O error, dev sda, sector 3495310 zfcp: The adapter 0.0.fce0 reported the following characteristics: WWNN 0x5005076400c7a10e, WWPN 0x50050764012061b0, S_ID 0x00631113, adapter version 0x2, LIC version 0x30a, FC link speed 2 Gb/s zfcp: Switched fabric fibrechannel network detected at adapter 0.0.fce0. sd 0:0:0:0: SCSI error: return code = 0x10000 end_request: I/O error, dev sda, sector 3495310 sd 0:0:0:0: SCSI error: return code = 0x10000 end_request: I/O error, dev sda, sector 524646 EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode block ode=33273, block=65573 Aborting journal on device sda1. sd 0:0:0:0: SCSI error: return code = 0x10000 end_request: I/O error, dev sda, sector 4150 Buffer I/O error on device sda1, logical block 511 Regards, Dick Waite Senior Consultant, Technical Marketing Manager Adabas, Software AG, 64297 Darmstadt, Germany Phone: +49 (0) 6151 921505 Mobile: +49 (0) 176 15 921505 Email:<mailto:[EMAIL PROTECTED]> ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
We got our two brand new FCP cards and tried to plut them to our McDATA SAN under zVM 5.2 and SLES 9.3. They refuse to work. So we are in the same boat. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
