ramdisk_size=65536 root=/dev/ram1 ro init=/linuxrc
TERM=dumb
HostIP=129.40.178.130 Hostname=lat130.pbm.ihost.com
Gateway=129.40.178.254.178.254 Netmask=255.255.255.0
Broadcast=129.40.178.255 Layer2=0
ReadChannel=0.0.0600 WriteChannel=0.0.0601
DataChannel=0.0.0602
Nameserver=129.40.106.1 Portname=dontcare
Install=nfs://129.40.46.206/nfs/sles10/CD1
UseVNC=1 VNCPassword=123456
InstNetDev=osa OsaInterface=qdio OsaMedium=eth
Manual=0
Everything is used correctly, vncserver starts, I
connect there, set partitions, choose software, start
install. After all needed files from CD1 are read,
system is rebooted, then rest of files are read and
then it asks for hostname and domain.
So I don't enter any of these parameters anywhere
during install, only hostname
--- "Post, Mark K" <[EMAIL PROTECTED]> wrote:
> Marian,
>
> Could you show your whole parmfile? I might be able
> to take a look at
> it.
>
>
> Mark Post
>
> -----Original Message-----
> From: Linux on 390 Port
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Marian Gasparovic
> Sent: Friday, October 27, 2006 1:33 PM
> To: [email protected]
> Subject: sles10 hostname
>
> Hello all,
> I install SLES10 with parameters in PARMFILE.
> Everything works nicely, only Hostname=xxx is not
> used, installer asks for it after first reboot. Am I
> doing something wrong ?
> Thank you
>
> ===================
> Marian Gasparovic
> ===================
> "The mere thought hadn't even begun to speculate
> about the merest
> possibility of crossing my mind."
>
>
----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access
> instructions,
> send email to [EMAIL PROTECTED] with the
> message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
>
__________________________________________________________________________________________
Check out the New Yahoo! Mail - Fire up a more powerful email and get things
done faster.
(http://advision.webevents.yahoo.com/mailbeta)
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
