On the VSE system you are using IP addresses of 192.168.099.nnn on the OSA and 
IP addresses of
192.168.193.nnn on the hyperchannel. That is probably good.

However in your previous message on the LINUX system you were using IP 
addresses of 192.168.192.nnn
on both interfaces. That doesn't match. You probably should change your IP 
addresses on the LINUX
system to be compatible with what you are doing on VSE if that is working.

If VSE isn't working on your network you need to get someone who knows about IP 
addresses to tell
you what to do with both Systems.

[EMAIL PROTECTED] wrote:
Hi Mark

I'm not sure what you mean.  As this is my first time into multiple
interfaces to the same host.

Are you saying that when VSE wants to use the hipersocket interface, it
should do so by using a different IP address?

In the VSE world, I have two routes:

* DIRECT ROUTES
  DEFINE ROUTE,ID=NEWESA4,LINKID=VSW1,IPADDR=192.168.099.024
  DEFINE ROUTE,ID=LINUX41,LINKID=HIP1,IPADDR=192.168.193.141
* INDIRECT ROUTES

On the Linux side, if I want to connect to it via the OSA/vswitch, I
specify an IP address of 192.168.193.141.
Are you suggesting that when I want to connect via the hiperchannel
(currently a test VSE system is the only other host on the
hiperchannel), that it specifies a different address (say
192.168.193.241)?



I do:

yast
network services
routing
Default gateway:  192.168.192.1

Select expert configuration
Add

Destination (for VSE)  192.168.192.7
Gateway for the hipersocket connection:  192.168.192.7 (coding a
direct
route?  right?)
Netmask:  255.255.255.0
Device:  I select the hipersocket one.


--
Stephen Frazier
Information Technology Unit
Oklahoma Department of Corrections
3400 Martin Luther King
Oklahoma City, Ok, 73111-4298
Tel.: (405) 425-2549
Fax: (405) 425-2554
Pager: (405) 690-1828
email:  stevef%doc.state.ok.us

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to