Brad,
I looked in there and didn't like what I saw, talked to one orf
the guys that configured the hardware, he said to try a different OSA
that wasn't shared with Z/os, with addrs E200-E202, and that worked!
Thanks everyone!!
--
Kelly F. Hickel
Senior Software Architect
MQSoftware, Inc
952.345.8677
[EMAIL PROTECTED]
> -----Original Message-----
> From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
> Brad Hinson
> Sent: Saturday, April 07, 2007 12:28 PM
> To: [email protected]
> Subject: Re: FW: any help installing 4.4 for s390 (or s390x) on Z9-BC?
>
> [snip]
> > I've tried what you wrote above with the same results. As far as
> the
> > addresses, I'm not positive, but that's what I was told. Presumably
> > there's some way, using the HMC to verify the addrs for LP7, but I
> don't
> > know how, so if you could give me some pointers, that would be
> great.
>
> You'll have to check the device definitions in the IOCDS config
> (Single
> Object Operations -> CPC Config menu -> Input/Output Configuration ->
> Options[Export Source File]). In ours, we have this line:
>
> IODEVICE ADDRESS=(800,010),CUNUMBR=(0800),UNIT=OSA
>
> Which means there are 10 devices starting at base address 0800
> (0800-0809).
>
> >
> > --------------------------------------------------------------------
> --
> > For LINUX-390 subscribe / signoff / archive access instructions,
> > send email to [EMAIL PROTECTED] with the message: INFO LINUX-
> 390 or visit
> > http://www.marist.edu/htbin/wlvindex?LINUX-390
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [EMAIL PROTECTED] with the message: INFO LINUX-390
> or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
