> -----Original Message-----
> From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
> Michael MacIsaac
> Sent: Monday, April 16, 2007 1:34 PM
> To: [email protected]
> Subject: Re: Centos 4.4 S390x - what's the proper way to install the
> 32 bit libstdc++ rpm?
>
> > [EMAIL PROTECTED] RPMS]# rpm -i libgcc-3.4.6-3.s390.rpm
> > package libgcc-3.4.6-3.1 (which is newer than libgcc-3.4.6-3)
> is
> > already installed
> I got an error similar to this recently and the problem turned out to
> be
> that I was pointing to a different install tree than the one that I
> installed from. So be sure what you are pointing to is the same set
> of
> RPMs from which Linux was installed.
Mike,
Well, that's sort of the problem. I've installed from the s390x
iso, but need the 32 bit libstdc++ rpm from the s390 iso. It seems that
I should have been able to do "yum install libstdc++.s390", but the yum
repo for s390x doesn't contain an rpm for that. So, I took the s390 rpm
from an iso image and tried to install that via yum and rpm, but they
both think it conflicts with the s390x rpm.
-Kelly
>
> Hope this helps.
>
> "Mike MacIsaac" <[EMAIL PROTECTED]> (845) 433-7061
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [EMAIL PROTECTED] with the message: INFO LINUX-390
> or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
