Its all logs when linux boots and rebooting.

ipl 
 
Booting default (ipl)...
 
Linux version 2.6.5-7.244-s390x ([EMAIL PROTECTED]) (gcc version 3.3.3 (SuSE 
Linux )) #1 SMP Mon Dec 12 18:32:25 UTC 2005
 
We are running under VM (64 bit mode) 
On node 0 totalpages: 262144
DMA zone: 262144 pages, LIFO batch:31 
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1 
Built 1 zonelists 
Kernel command line: dasd=82a9 root=/dev/dasda1 VMPOFF=LOGOFF VMHALT=LOGOFF 
selnux=0 TERM=dumb elevator=cfq BOOT_IMAGE=0 
PID hash table entries: 4096 (order 12: 65536 bytes)
CKRM Initialization 
...... Initializing ClassType<taskclass> ........ 
...... Initializing ClassType<socketclass> ........ 
CKRM Initialization done
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) 
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1019136k/1048576k available (3456k kernel code, 0k reserved, 1075k
data, 116k init) 
Security Scaffold v1.0.0 initialized
SELinux:Disabled at boot. 
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
Detected 1 CPU's
Boot cpu address0 
cpu 0 phys_idx=0 vers=FF ident=022AED machine=2096 unused=8000
Brought up 1 CPUs 
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd 
Freeing initrd memory: 1493k freed
khelper: max 64 concurrent processes
debug: Initialization complete
resid is -1 name is io <NULL> 
CKRM .. create res clsobj for resouce <io>class <taskclass>
par=0000000000000000 
NET: Registered protocol family 16
VFS: Disk quotas dquot_6.5.1
Initializing Cryptographic API
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
loop: loaded (max 8 devices)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Channel measurement facility using extended format (autodetected) 
NET: Registered protocol family 2 
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536) 
NET: Registered protocol family 1 
resid is -1 name is cpu <NULL>
CKRM .. create res clsobj for resouce <cpu>class <taskclass>
par=0000000000000000 
........init_ckrm_sched_res , resid= 5
md: Autodetecting RAID arrays.
md: autorun ... 
md: ... autorun DONE. 
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Starting udev 
Creating devices
Loading kernel/drivers/s390/block/dasd_mod.ko dasd=82a9 
Loading kernel/drivers/s390/block/dasd_eckd_mod.ko
dasd(eckd): 0.0.82a9: 3390/0A(CU:3990/01) Cyl:3339 Head:15 Sec:224
Using cfq io scheduler
dasd(eckd): 0.0.82a9: (4kB blks): 2404080kB at 48kB/trk compatible disk layout
 dasda:VOL1/0X2119: dasda1 
Waiting for device /dev/dasda1 to appear: . ok
rootfs:major=94 minor=1 devn=24065
rootfs: /sys/block/dasda/dasda1 major=94 minor=1 devn=24065 
EXT2-fs warning (device dasda1): ext2_fill_super: mounting ext3 filesystem
as ext2 
VFS: Mounted root (ext2 filesystem) readonly. 
Trying to move old root to /initrd ... /initrd does not exist. Ignored. 
Unmounting old root 
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 116k freed
 INIT: version 2.85 booting 
System Boot Control: Running /etc/init.d/boot 
Mounting /proc filesystem..done 
Mounting sysfs on /sys..done
Mounting /dev/pts..done 
 Boot logging started on /dev/ttyS0(/dev/console) at Wed May 23 10:59:51 2007
Mounting shared memory FS on /dev/shm..done 
Activating swap-devices in /etc/fstab...
[1A..doneChecking root file system... 
fsck 1.38 (30-Jun-2005) 
[/sbin/fsck.ext3 (1) -- /dev/shm/root] fsck.ext3 -a /dev/shm/root 
/dev/shm/root: clean, 46323/300960 files, 400702/600996 blocks
[1A..doneHotplug is already active(disable withNOHOTPLUG=1 at the boot
prompt)..done
md: Autodetecting RAID arrays.
md: autorun ... 
md: ... autorun DONE. 
Activating device mapper... 
device-mapper: Allocated new minor_bits array for 1024 devices
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED]
Creating /dev/mapper/control character device with major:10 minor:63. 
..done
Scanning for LVM volume groups... 
Reading all physical volumes.This may take a while... 
No volume groups found
Activating LVM volume groups... 
No volume groups found
..done
Checking file systems...
fsck 1.38 (30-Jun-2005) 
Checking all file systems.
[1A..doneSetting up..done 
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw) 
tmpfs on /dev/shm type tmpfs (rw) 
devpts on /dev/pts type devpts (rw,mode=0620,gid=5) 
nothing was mounted 
[1A..doneSetting up the system clock..done
Loading required kernel modules 
[1A..doneActivating remaining swap-devices in /etc/fstab... 
[1A..doneRestore device permissions..done 
Creating /var/log/boot.msg
[1A..doneSetting up timezone data..done 
Setting scheduling timeslices ..unused
Setting up hostname 'lnxpb'..done 
Setting up loopback interface lo
loIP address: 127.0.0.1/8 
..done
Enabling syn flood protection..done 
Disabling IP forwarding..done 
..done
System Boot Control: The system has been set up 
Skipped features:[80C [17Dboot.sched
System Boot Control: Running /etc/init.d/boot.local 
[1A..done INIT: Entering runlevel: 3
 Boot logging started on /dev/ttyS0(/dev/console) at Wed May 23 11:00:25 2007 
Master Resource Control: previous runlevel: N, switching to runlevel: 3 
Initializing random number generator..done
coldplug scanning ccw: *qdio: loading QDIO base support version 2
($Revision: 1.79.2.9 $/$Revision: 1.57 $/$Revision: 1.23.2.2 $) 
qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.77.2.60
$/$Revision: 1.98.2.28 $/$Revision: 1.27.2.9 $/$Revision: 1.8.2.2 $/$Revision: 
1.7.2.3
$/$Revision: 1.5.2.6 $/$Revision: 1.19.2.17 $ :IPv6 :VLAN) 
*..done 
 scanning input: qeth: Device 0.0.0720/0.0.0721/0.0.0722 is a GuestLAN 
QDIO card (level: V522) 
with link type GuestLAN QDIO (portname: PORTFE00) 
qeth: Hardware IP fragmentation not supported on eth0 
qeth: Inbound source address not supported on eth0
qeth: VLAN enabled
qeth: Multicast enabled
qeth: IPV6 enabled
qeth: Broadcast enabled 
qeth: Using SW checksumming on eth0.
qeth: Outbound TSO not supported on eth0
..done
..........................done  
Setting up network interfaces:
lo
loIP address: 127.0.0.1/8 
[1A..doneeth0 
eth0configuration: qeth-bus-ccw-0.0.0720
eth0IP address: 10.20.55.4/28 
[1A..doneSetting up service network............. .....done 
Starting syslog services..done
Starting resource manager..done 
Starting RPC portmap daemon..done 
Starting slpd ..done
Importing Net File System (NFS)..unused 
Starting nfsboot (sm-notify) ..done 
Starting SSH daemon/etc/ssh/sshd_config line 81: Deprecated option 
PAMAuthenticationViaKBDInt 
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver 
..done
May 23 11:00:27 lnxpb postfix[973]: warning: My hostname lnxpb is not a
fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf 
May 23 11:00:27 lnxpb postfix/master[974]: warning: My hostname lnxpb is not
a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf
No available keymaps for machine s390x found
Starting mail service (Postfix)May 23 11:00:27 lnxpb
postfix/postsuper[1016]: warning: My hostname lnxpb is not a fully qualified 
name - set myhostname ormydomain in /etc/postfix/main.cf 
May 23 11:00:27 lnxpb postfix/postfix-script: warning: My hostname lnxpb is
not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf 
..done
May 23 11:00:27 lnxpb postfix/master[1020]: warning: My hostname lnxpb is
not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf 
Starting hardware scan on bootMay 23 11:00:27 lnxpb postfix/qmgr[1051]:
warning: My hostname lnxpb is not a fully qualified name - set myhostname or
mydomain in /etc/postfix/main.cf 
Starting CRON daemon..done
May 23 11:00:27 lnxpb postfix/pickup[1047]: warning: My hostname lnxpb is
not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf 
postconf: warning: My hostname lnxpb is not a fully qualified name - set
myhostname or mydomain in /etc/postfix/main.cf 
Starting Name Service Cache Daemon..done 
SCSI subsystem initialized
st: Version 20040318, fixed bufsize 32768, s/g segs 256 
Starting INET services. (xinetd)..done
May 23 11:00:28 lnxpb postfix[1102]: warning: My hostname lnxpb is not a
fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf
May 23 09:00:29 lnxpb postfix/postqueue[1103]: warning: My hostname lnxpb is
not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf
May 23 11:00:31 lnxpb kernel: klogd 1.4.1, log source = /proc/kmsg started. 
May 23 11:00:31 lnxpb kernel: qdio: loading QDIO base support version 2
($Revision: 1.79.2.9 $/$Revision: 1.57 $/$Revision: 1.23.2.2 $) 
May 23 11:00:31 lnxpb kernel: qeth: loading qeth S/390 OSA-Express driver
($Revision: 1.77.2.60 $/$Revision: 1.98.2.28 $/$Revision: 1.27.2.9 $/$Revision:
1.8.2.2 $/$Revision: 1.7.2.3 $/$Revision: 1.5.2.6 $/$Revision: 1.19.2.17 $ :IPv6
:VLA ) 
May 23 11:00:31 lnxpb kernel: qeth: Device 0.0.0720/0.0.0721/0.0.0722 is a
Guest LAN QDIO card (level: V522)
May 23 11:00:31 lnxpb kernel: with link type GuestLAN QDIO (portname:PORTFE00)
May 23 11:00:31 lnxpb kernel: qeth: Hardware IP fragmentation not supported on 
eth0 
May 23 11:00:31 lnxpb kernel: qeth: Inbound source address not supported on 
eth0 
May 23 11:00:31 lnxpb kernel: qeth: VLAN enabled
May 23 11:00:31 lnxpb kernel: qeth: Multicast enabled 
May 23 11:00:31 lnxpb kernel: qeth: IPV6 enabled
May 23 11:00:31 lnxpb kernel: qeth: Broadcast enabled 
May 23 11:00:31 lnxpb kernel: qeth: Using SW checksumming on eth0.
May 23 11:00:31 lnxpb kernel: qeth: Outbound TSO not supported on eth0
May 23 11:00:31 lnxpb kernel: NET: Registered protocol family 10
May 23 11:00:31 lnxpb kernel: IPv6 over IPv4 tunneling driver 
May 23 11:00:31 lnxpb kernel: SCSI subsystem initialized
May 23 11:00:31 lnxpb kernel: st: Version 20040318, fixed bufsize 32768, s/g 
segs 256 
May 23 11:00:32 lnxpb ifup: No configuration found for sit0 
Master Resource Control: runlevel 3 has been reached
Failed services in runlevel 3:[80C [10Dkbd
Skipped services in runlevel 3:[80C [17Dnfs splash
May 23 11:00:37 lnxpb kernel: eth0: no IPv6 routers present  
 
Welcome to SUSE LINUX Enterprise Server 9 (s390x) - Kernel 2.6.5-7.244-s390x 
(ttyS0) 
lnxpb login:

ifconfig -a 

eth0Link encap:EthernetHWaddr 02:00:00:00:00:05 
inet addr:10.20.55.4Bcast:10.20.55.15Mask:255.255.255.240 
inet6 addr: fe80::200:0:100:5/64 Scope:Link 
UP BROADCAST RUNNING MULTICASTMTU:1492Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 
txqueuelen:1000
RX bytes:120 (120.0 b)TX bytes:1325 (1.2 Kb)

loLink encap:Local Loopback 
inet addr:127.0.0.1Mask:255.0.0.0 
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNINGMTU:16436Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0 
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 
lnxpb:~ # ping -c 2 10.20.55.3 
ping -c 2 10.20.55.3 
PING 10.20.55.3 (10.20.55.3) 56(84) bytes of data. 
64 bytes from 10.20.55.3: icmp_seq=1 ttl=64 time=0.513 ms
64 bytes from 10.20.55.3: icmp_seq=2 ttl=64 time=0.407 ms
--- 10.20.55.3 ping statistics --- 
2 packets transmitted, 2 received, 0% packet loss, time 999ms 
rtt min/avg/max/mdev = 0.407/0.460/0.513/0.053 ms 

lnxpb:~ # reboot 
reboot 
 
Broadcast message from root (ttyS0) (Wed May 23 11:24:58 2007): 
 The system is going down for reboot NOW!
 INIT: Switching to runlevel: 6
 INIT: Sending processes the TERM signal
 INIT: Sending processes the KILL signal
lnxpb:~ #Boot logging started on /dev/ttyS0(/dev/console) at Wed May 23 
11:25:21 2007 
Master Resource Control: previous runlevel: 3, switching to runlevel: 6 
May 23 11:25:21 lnxpb xinetd[1054]: Exiting...
Shutting down xinetd:..done 
Shutting down Name Service Cache Daemon..done 
Shutting down CRON daemon..done 
Shutting down mail service (Postfix)..done
postconf: warning: My hostname lnxpb is not a fully qualified name - set
myhostname or mydomain in /etc/postfix/main.cf 
Shutting down SSH daemon..done
Remove Net File System (NFS)..unused
Shutting down resource manager..done
Shutting down slpd ..done 
Shutting down RPC portmap daemon..done
Shutting down syslog servicesMay 23 11:25:22 lnxpb kernel: Kernel logging 
(proc) stopped. 
May 23 11:25:22 lnxpb kernel: Kernel log daemon terminating.
..done
Shutting down network interfaces: 
eth0
eth0configuration: qeth-bus-ccw-0.0.0720
[1A..doneShutting down service network.................done 
Saving random seed..done
..done
Running /etc/init.d/halt.local
[1A..doneSending all processes the TERM signal.....done
Sending all processes the KILL signal.....done
Restore device permissions..done
Turning off swap
[1A..doneUnmounting file systems
devpts umounted 
tmpfs umounted
sysfs umounted
/dev/dasda1 umounted
[1A..done..done 
disabling Hotplug ..done
proc umounted 
 [10;440] Please stand by while rebooting the system... 
 md: stopping all md devices. 
md: md0 switched to read-only mode. 
Restarting system.
Booting default (ipl)...
Linux version 2.6.5-7.244-s390x ([EMAIL PROTECTED]) (gcc version 3.3.3 
(SuSELinux)) #1 SMP Mon Dec 12 18:32:25 UTC 2005
We are running under VM (64 bit mode) 
On node 0 totalpages: 262144
DMA zone: 262144 pages, LIFO batch:31 
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1 
Built 1 zonelists 
Kernel command line: dasd=82a9 root=/dev/dasda1 VMPOFF=LOGOFF VMHALT=LOGOFF
selinux=0 TERM=dumb elevator=cfq BOOT_IMAGE=0 
PID hash table entries: 4096 (order 12: 65536 bytes)
CKRM Initialization 
...... Initializing ClassType<taskclass> ........ 
...... Initializing ClassType<socketclass> ........ 
CKRM Initialization done
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) 
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1019136k/1048576k available (3456k kernel code, 0k reserved, 1075k data 
 116k init) 
Security Scaffold v1.0.0 initialized
SELinux:Disabled at boot. 
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
Detected 1 CPU's
Boot cpu address0 cpu 0 phys_idx=0 vers=FF ident=022AED machine=2096 unused=8000
Brought up 1 CPUs 
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd 
Freeing initrd memory: 1493k freed
khelper: max 64 concurrent processes
debug: Initialization complet 
resid is -1 name is io <NULL> 
CKRM .. create res clsobj for resouce <io>class <taskclass>
par=000000000000000
NET: Registered protocol family 16
VFS: Disk quotas dquot_6.5.1
Initializing Cryptographic API
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
loop: loaded (max 8 devices)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Channel measurement facility using extended format (autodetected) 
NET: Registered protocol family 2 
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536) 
NET: Registered protocol family 1 
resid is -1 name is cpu <NULL>
CKRM .. create res clsobj for resouce <cpu>class <taskclass>
par=0000000000000000 
........init_ckrm_sched_res , resid= 5
md: Autodetecting RAID arrays.
md: autorun ... 
md: ... autorun DONE. 
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Starting udev 
Creating devices
Loading kernel/drivers/s390/block/dasd_mod.ko dasd=82a9 
Loading kernel/drivers/s390/block/dasd_eckd_mod.ko
dasd(eckd): 0.0.82a9: 3390/0A(CU:3990/01) Cyl:3339 Head:15 Sec:224
Using cfq io scheduler
dasd(eckd): 0.0.82a9: (4kB blks): 2404080kB at 48kB/trk compatible disk layout
 dasda:VOL1/0X2119: dasda1
Waiting for device /dev/dasda1 to appear: . ok
rootfs:major=94 minor=1 devn=24065
rootfs: /sys/block/dasda/dasda1 major=94 minor=1 devn=24065 
EXT2-fs warning (device dasda1): ext2_fill_super: mounting ext3 filesystem as 
ext2
VFS: Mounted root (ext2 filesystem) readonly. 
Trying to move old root to /initrd ... /initrd does not exist. Ignored. 
Unmounting old root 
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 116k freed
 INIT: version 2.85 booting 
System Boot Control: Running /etc/init.d/boot 
Mounting /proc filesystem..done 
Mounting sysfs on /sys..done
Mounting /dev/pts..done 
 Boot logging started on /dev/ttyS0(/dev/console) at Wed May 23 11:26:45 2007 
Mounting shared memory FS on /dev/shm..done 
Activating swap-devices in /etc/fstab... 
[1A..doneChecking root file system... 
fsck 1.38 (30-Jun-2005) 
[/sbin/fsck.ext3 (1) -- /dev/shm/root] fsck.ext3 -a /dev/shm/root 
/dev/shm/root: clean, 46325/300960 files, 400709/600996 blocks
[1A..doneHotplug is already active(disable withNOHOTPLUG=1 at the boot
prompt)..done
md: Autodetecting RAID arrays.
md: autorun ... 
md: ... autorun DONE. 
Activating device mapper... 
device-mapper: Allocated new minor_bits array for 1024 devices
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED]
Creating /dev/mapper/control character device with major:10 minor:63. 
..done
Scanning for LVM volume groups... 
Reading all physical volumes.This may take a while... 
No volume groups found
Activating LVM volume groups... 
No volume groups found
..done
Checking file systems...
fsck 1.38 (30-Jun-2005) 
Checking all file systems.
[1A..doneSetting up..done 
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw) 
tmpfs on /dev/shm type tmpfs (rw) 
devpts on /dev/pts type devpts (rw,mode=0620,gid=5) 
nothing was mounted 
[1A..doneSetting up the system clock..done
Loading required kernel modules 
[1A..doneActivating remaining swap-devices in /etc/fstab... 
[1A..doneRestore device permissions..done
Creating /var/log/boot.msg
[1A..doneSetting up timezone data..done 
Setting scheduling timeslices ..unused
Setting up hostname 'lnxpb'..done 
Setting up loopback interface lo
loIP address: 127.0.0.1/8 
..done
Enabling syn flood protection..done 
Disabling IP forwarding..done 
..done
System Boot Control: The system has been set up 
Skipped features:[80C [17Dboot.sched
System Boot Control: Running /etc/init.d/boot.local 
[1A..done INIT: Entering runlevel: 3
 Boot logging started on /dev/ttyS0(/dev/console) at Wed May 23 11:27:26 2007 
Master Resource Control: previous runlevel: N, switching to runlevel: 3 
Initializing random number generator..done
coldplug scanning ccw: *qdio: loading QDIO base support version 2
($Revision: 1.79.2.9 $/$Revision: 1.57 $/$Revision: 1.23.2.2 $) 
qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.77.2.60
$/$Revision: 1.98.2.28 $/$Revision: 1.27.2.9 $/$Revision: 1.8.2.2 $/$Revision: 
1.7.2.3
$/$Revision: 1.5.2.6 $/$Revision: 1.19.2.17 $ :IPv6 :VLAN) 
*..done 
 scanning input: ..done 
 ..........................done 
qeth: Device 0.0.0720/0.0.0721/0.0.0722 is a Guest LAN QDIO card (level:
V522)
with link type GuestLAN QDIO (portname: PORTFE00) 
qeth: Hardware IP fragmentation not supported on eth0  
qeth: Inbound source address not supported on eth0
qeth: VLAN enabled
qeth: Multicast enabled 
qeth: IPV6 enabled
qeth: Broadcast enabled 
qeth: Using SW checksumming on eth0.
qeth: Outbound TSO not supported on eth0
Setting up network interfaces:
lo
loIP address: 127.0.0.1/8 
[1A..doneeth0 
eth0configuration: qeth-bus-ccw-0.0.0720
eth0IP address: 10.20.55.4/28 
[1A..doneSetting up service network..................done 
Starting syslog services..done
Starting resource manager..done 
Starting RPC portmap daemon..done 
Starting slpd ..done
Importing Net File System (NFS)..unused 
Starting nfsboot (sm-notify) ..done 
Starting SSH daemon/etc/ssh/sshd_config line 81: Deprecated option
PAMAuthenticationViaKBDInt 
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver 
..done
May 23 11:27:27 lnxpb postfix[974]: warning: My hostname lnxpb is not a
fully qalified name - set myhostname or mydomain in /etc/postfix/main.cf 
No available keymaps for machine s390x found 
Starting mail service (Postfix)May 23 11:27:27 lnxpb postfix/master[976]:
warning: My hostname lnxpb is not a fully qualified name - set myhostname or
mydomain in /etc/postfix/main.cf 
May 23 11:27:28 lnxpb postfix/postsuper[1017]: warning: My hostname lnxpb is
not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf
May 23 11:27:28 lnxpb postfix/postfix-script: warning: My hostname lnxpb is 
not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf 
 
..done
May 23 11:27:28 lnxpb postfix/master[1021]: warning: My hostname lnxpb is
not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf 
 
postconf: warning: My hostname lnxpb is not a fully qualified name - set
myhostname or mydomain in /etc/postfix/main.cf 
Starting hardware scan on bootMay 23 11:27:28 lnxpb postfix/pickup[1055]:
warning: My hostname lnxpb is not a fully qualified name - set myhostname or
mydomain in /etc/postfix/main.cf 
Starting Name Service Cache Daemon..done
May 23 11:27:28 lnxpb postfix/qmgr[1056]: warning: My hostname lnxpb is not
a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf 
Starting CRON daemon..done
SCSI subsystem initialized
st: Version 20040318, fixed bufsize 32768, s/g segs 256 
May 23 11:27:29 lnxpb postfix[1103]: warning: My hostname lnxpb is not a
fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf
Starting INET services. (xinetd)..done 
May 23 09:27:30 lnxpb postfix/postqueue[1104]: warning: My hostname lnxpb is
not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf
May 23 11:27:32 lnxpb kernel: klogd 1.4.1, log source = /proc/kmsg started. 
May 23 11:27:32 lnxpb kernel: qdio: loading QDIO base support version 2
($Revision: 1.79.2.9 $/$Revision: 1.57 $/$Revision: 1.23.2.2 $) 
May 23 11:27:32 lnxpb kernel: qeth: loading qeth S/390 OSA-Express driver
($Revision: 1.77.2.60 $/$Revision: 1.98.2.28 $/$Revision: 1.27.2.9 $/$Revision:
1.8.2.2 $/$Revision: 1.7.2.3 $/$Revision: 1.5.2.6 $/$Revision: 1.19.2.17 $ 
:IPv6:VLAN) 
May 23 11:27:32 lnxpb kernel: qeth: Device 0.0.0720/0.0.0721/0.0.0722 is a
Guest LAN QDIO card (level: V522)
May 23 11:27:32 lnxpb kernel: with link type GuestLAN QDIO (portname:PORTFE00)  
May 23 11:27:32 lnxpb kernel: qeth: Hardware IP fragmentation not supported on 
eth0 
May 23 11:27:32 lnxpb kernel: qeth: Inbound source address not supported on eth0
May 23 11:27:32 lnxpb kernel: qeth: VLAN enabled 
May 23 11:27:32 lnxpb kernel: qeth: Multicast enabled 
May 23 11:27:32 lnxpb kernel: qeth: IPV6 enabled
May 23 11:27:32 lnxpb kernel: qeth: Broadcast enabled 
May 23 11:27:32 lnxpb kernel: qeth: Using SW checksumming on eth0. 
May 23 11:27:32 lnxpb kernel: qeth: Outbound TSO not supported on eth0
May 23 11:27:32 lnxpb kernel: NET: Registered protocol family 10
May 23 11:27:32 lnxpb kernel: IPv6 over IPv4 tunneling driver 
May 23 11:27:32 lnxpb kernel: SCSI subsystem initialized
May 23 11:27:32 lnxpb kernel: st: Version 20040318, fixed bufsize 32768, s/g 
segs 256 
May 23 11:27:32 lnxpb ifup: No configuration found for sit0 
..done
Master Resource Control: runlevel 3 has been reached
Failed services in runlevel 3:[80C [10Dkbd
Skipped services in runlevel 3:[80C [17Dnfs splash
May 23 11:27:38 lnxpb kernel: eth0: no IPv6 routers present 
 
Welcome to SUSE LINUX Enterprise Server 9 (s390x) - Kernel 2.6.5-7.244-s390x 
(ttyS0). 
lnxpb login: 


ifconfig -a 
eth0Link encap:EthernetHWaddr 02:00:00:00:00:05 
inet addr:10.20.55.4Bcast:10.20.55.15Mask:255.255.255.240 
inet6 addr: fe80::200:0:200:5/64 Scope:Link 
UP BROADCAST RUNNING MULTICASTMTU:1492Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b)TX bytes:1537 (1.5 Kb)

loLink encap:Local Loopback 
inet addr:127.0.0.1Mask:255.0.0.0 
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNINGMTU:16436Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0 
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 
collisions:0 txqueuelen:0 
RX bytes:634 (634.0 b)TX bytes:634 (634.0 b)

 
lnxpb:~ # ping -c 2 10.20.55.3 
ping -c 2 10.20.55.3 
PING 10.20.55.3 (10.20.55.3) 56(84) bytes of data. 
 
--- 10.20.55.3 ping statistics --- 
2 packets transmitted, 0 received, 100% packet loss, time 1016ms 


ifup eth0, ifconfig eth0 /etc/init.d/network restart - nothing changing.
I tried rmmod and modprobe all depends moduls to eth0.

Any idea?

Adam Gill

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to