Quoting Alan Altmark <[EMAIL PROTECTED]>: > > SLES 10 isn't mentioned. It is a Really Bad Idea to try to install IBM > middleware on anything other than the supported platforms. (a) It may not > install, and (2) it isn't supported by the Support Center. The best bet > is to call it in. Don't worry, they'll tell you if you've wandered off > the farm. :-) > I have a spreadsheet entitled "Tivoli Non-Confidential Platform & Database Support Matrix" that indicates SLES10 on zSeries is supported in 31-bit mode. For sles10 that means you have to install and use the "s390" package to coerce the Tivoli installer into thinking that it is running in a 31-bit environment. Once installed you must also run the TEPS using the s390 command. This also works for a 64-bit sles9 install.
The matrix can be had from: http://www-1.ibm.com/support/docview.wss?uid=swg21067036 Leland ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
