Hi Mike, Since this is an internal only network the ip address should not matter at all (my thought anyway), plus if we were to use a real routable address that could become a problem if a session to that address were made over the OSA (not hipersockets path) ... ??? but I guess if were to reserve a 10.*.*.* (* something) for z/linux only then that would be ok.
-----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Michael MacIsaac Sent: Friday, July 27, 2007 8:50 AM To: [email protected] Subject: Re: Hipersockets Paul, > setup the hipersocket network as 12. for testing and so it stands out Would it be better to use 10.? 12. is a real class A IP address range. 10. is the private class A range (RFC 1918 I believe). "Mike MacIsaac" <[EMAIL PROTECTED]> (845) 433-7061 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
