Hello Mark,
with san_disc from SLES9 SP3 I'm getting the same results (only some or
even no targets listed).
# which san_disc
/usr/bin/san_disc
# rpm -qf /usr/bin/san_disc
s390-tools-1.5.1-0.4
# san_disc -v
san_disc $Revision: 1.36 $
# modprobe zfcp_hbaapi
# san_disc -c PORT_LIST -a 6
No. Port WWN Node WWN DID Type
1 0x500104f00091552f 0x500104f00091552e 0x760813 N_Port
san_disc: HBA_SendCTPassThru failed
# san_disc -c PORT_LIST -a 6
No. Port WWN Node WWN DID Type
1 0x500104f00091552f 0x500104f00091552e 0x760813 N_Port
2 0x500104f0009154cc 0x500104f0009154cb 0x761413 N_Port
3 0x500104f00091549c 0x500104f00091549b 0x765613 N_Port
san_disc: HBA_SendCTPassThru failed
# san_disc -c PORT_LIST -a 6
No. Port WWN Node WWN DID Type
san_disc: HBA_SendCTPassThru failed
Mark Post wrote:
>Did you try using the version that came with SLES9?
Andreas Mayer
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
