Thanks for the great input. I remade the initrd then didn't run the zipl command. Well, I said I was a rookie.
THanks for the responses. Ron -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Mark Post Sent: Friday, October 26, 2007 1:28 PM To: [email protected] Subject: Re: "Large" Number of DASD on zLinux on zVM >>> On Fri, Oct 26, 2007 at 1:20 PM, in message <[EMAIL PROTECTED]>, RPN01 <[EMAIL PROTECTED]> wrote: > We run over 30 3390 mod 27 devices in a single Linux image w/o > problems. Did you extend the /dev/dasd devices past /dev/dasdz? This > could account for the problem... Although 800-81f is 31 devices, so I may be way off base. If he's running RHEL4 or 5, udev should be taking care of creating any device nodes he needs. I suspect the problem is he didn't rebuild his initrd, as someone else pointed out. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
