I have a server with the disks accessed as follows slmgad01:~ # cat /proc/dasd/devices 0.0.0100(ECKD) at ( 94: 0) is dasda : active at blocksize: 4096, 1802880 blocks, 7042 MB 0.0.0101(FBA ) at ( 94: 4) is dasdb : active at blocksize: 512, 524288 blocks, 256 MB 0.0.0102(FBA ) at ( 94: 8) is dasdc : active at blocksize: 512, 1048576 blocks, 512 MB 0.0.0103(ECKD) at ( 94: 28) is dasdh : active at blocksize: 4096, 1802340 blocks, 7040 MB slmgad01:~ #
I'd like to be able to relabel 0,0.103 from dasdh to dasdd (more for the sake of tidiness than anything else) but cant seem to find where the values is stored. I've run chccwdev to take the device offline and then detached it before linking again and bringing it online. How can I get the device reference to change ? Thanks Jerry Whitteridge Mainframe Engineering Safeway Inc 925 951 4184 [EMAIL PROTECTED] "Email Firewall" made the following annotations. ------------------------------------------------------------------------------ Warning: All e-mail sent to this address will be received by the corporate e-mail system, and is subject to archival and review by someone other than the recipient. This e-mail may contain proprietary information and is intended only for the use of the intended recipient(s). If the reader of this message is not the intended recipient(s), you are notified that you have received this message in error and that any review, dissemination, distribution or copying of this message is strictly prohibited. If you have received this message in error, please notify the sender immediately. ============================================================================== ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
<<penguin_html_6cc443b4.gif>>
