Mark,
Thanks that got me further. But how I get:
ifconfig ctc0 199.42.190.8 pointopoint 199.42.190.45 route add d
<199.42.190.8 p
ointopoint 199.42.190.45 route add de
fault gw 199.42.190 <99.42.190.45 route add default gw
199.4
2.190. 45
route: Host name lookup failure
ifconfig: `--help' gives usage information.
novstart:~ #
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Mark Post
Sent: Monday, June 30, 2008 3:45 PM
To: [email protected]
Subject: Re: Adding CTC to SLES 10 VM starter system
>>> On Mon, Jun 30, 2008 at 3:21 PM, in message
<[EMAIL PROTECTED]>,
"Sienicki, Paul K" <[EMAIL PROTECTED]> wrote:
> Can anyone tell me what I did wrong in attempting to define a CTC from
> NOVSTART SLES 10 starter system to a VM TCPIP stack?
-snip-
modprobe ctc
echo 0.0.0e00,0.0.0e01 > /sys/bus/ccwgroup/drivers/ctc/group
echo 1 > /sys/bus/ccwgroup/drivers/ctc/0.0.0e00/online
ifconfig ctc0 199.42.190.8 pointopoint 199.42.190.45 route add default
gw 199.42.190.45
Mark Post
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send
email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
