Hello Mark! This was it. It is now working. Thanks a lot.
BR Florian On Tue, Sep 2, 2008 at 2:16 AM, Mark Post <[EMAIL PROTECTED]> wrote: > >>> On 9/1/2008 at 5:13 PM, in message > <[EMAIL PROTECTED]>, Florian Bilek > <[EMAIL PROTECTED]> wrote: > > Dear all, > > > > Does somebody know when exactly a LVM volume group is activated during > > startup of SLES 10 SP2? > > > > I have defined a LVM with two 3390-25. After a reboot of my LINUX image, > the > > logical volume is not active and therefore the mount in FSTAB is not > > working. > > I must do a lvchange -a y system and then the mount is working. > > Is the activation also done during the init phase from the initrd and do > I > > have to make a zipl for this? > > Actually, you'll likely need to do both a mkinitrd and zipl, since it > appears the necessary LVM kernel modules aren't being included in your > current initrd. To make sure, you can do "mkinitrd -f lvm2" and you should > be set. > > > Mark Post > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- Best regards Florian Bilek ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
