-OK,
I went and tried it with the sles10 sp2 rescue system image from the DVD to make sure it wasn't my guest. Same problem. I then went and tried the sles10 SP2 rescue system image from a z9 with z/VM 5.3 That worked. So, I'm sure the HW is fine (it runs the vswitch - why couldn't it run it dedicated, right?) So, it's likely z/VM 5.4, or perhaps the z10 - but I find that hard to believe since the OSA does function on vswitch. I guess I'll open a PMR. Marcy >Yep, same chpid. >This is on a z10, z/VM 5.4, sles 10 sp2. >Maybe I should go try in on a z9, z/VM 5.3 and sles9 sp4 just for grins >since it sounds like it ought to work! Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: Linux on 390 Port [EMAIL PROTECTED] On Behalf Of Mark Post Sent: Tuesday, October 07, 2008 3:56 PM To: [email protected] Subject: Re: [LINUX-390] Change the Linux from VSWITCH to DEDICATEd OSA addresses >>> On 10/7/2008 at 6:46 PM, in message Marcy Cortes <[EMAIL PROTECTED]> wrote: > But that's got to be a big lie :) --- it is working if it is on a > vswitch. Just not with dedicates. > The cables are happy. The ports are happy. The physical switch is > happy. Are you sure what is/was being used for the VSWITCH is on the same CHPID as the new device you're trying to use? Each card has two possible cable connections (4 with the new z10s). Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
smime.p7s
Description: S/MIME cryptographic signature
