I believe that this APAR is already installed: service all status VM64466 VMFSRV2760I SERVICE processing started VMFSRV1226I CP (5VMCPR30%CP) APAR VM64466 (PTF UM32482) status: VMFSRV1226I RECEIVED 11/03/08 18:43:28 VMFSRV1226I APPLIED 11/03/08 18:43:32 VMFSRV1226I BUILT 11/03/08 18:44:22 VMFSRV1226I PUT2PROD 11/03/08 18:55:27 VMFSRV2760I SERVICE processing completed successfully Ready; T=0.84/0.90 18:49:47
service all status UM32414 VMFSRV2760I SERVICE processing started VMFSRV1226I CP (5VMCPR30%CP) PTF UM32414 status: VMFSRV1226I SUPED 11/03/08 18:43:32 VMFSRV1226I BUILT 11/03/08 18:44:22 VMFSRV1226I PUT2PROD 11/03/08 18:55:27 VMFSRV2760I SERVICE processing completed successfully Ready; T=0.83/0.88 18:50:52 q cplevel z/VM Version 5 Release 3.0, service level 0701 (64-bit) Generated at 05/29/07 23:21:12 BDT IPL at 04/25/08 12:58:27 BDT Ready; T=0.01/0.01 18:51:30 The RSU level is not uptodate, do you believe that this can be the problem? Any another idea? Thanks for the help..... Best Regards. 2008/11/4 David Boyes <[EMAIL PROTECTED]> > > 17:31:34 * MSG FROM SOLDIST : panicفcpu0¨/thread=264200: > > > > 17:31:34 * MSG FROM SOLDIST : BAD TRAP: type=6 ctx=261dd0 > > addr=68062e98 > > You need to apply VM64466 to your VM system. See page 2 of the install > guide. > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- Lívio Sousa
