Hi all,
I am trying to setup a VIPA interface on my RHEL V5.2 and distribute the
routes using ospfd (using the quagga package).
What I am trying to accomplish is having 3 physical interfaces (ctc0, hsi0
and eth0) and one dummy interface representing the VIPA interface.
The main reason for doing this is getting z/OS machines to use hsi device
when connecting to the VIPA address and the rest of the world should connect
using the eth interface. Furthermore in the case of an hsi failure I would
like the z/OS to automatically use the eth interface in order to connect to
the Linux machine.
I really don't want to use static routes so I went to OSPF to find the
answer.
Can anyone please send a zebra.conf and ospfd.conf example to accomplish
that?
This are the files I created (obviously there is something wrong there… I
know very little about ospf but I did my best J)
zebra.conf file:
hostname LNXS3
password zebra
# log file /var/log/quagga/zebra.log information
interface eth0
no shutdown
ospfd.conf file:
! -*- ospf -*-
!
! OSPFd sample configuration file
!
!
hostname ospfd
password zebra
log file /var/log/quagga/ospfd.log
!enable password please-set-at-here
!
interface eth0
ip ospf priority 1
!interface hsi0
! ip ospf priority 2
interface ctc0
ip ospf priority 2
!
interface dummy0
router ospf
redistribute connected
passive-interface dummy0
network 172.20.140.0/24 area 0.0.0.0
network 172.20.101.1/32 area 0.0.0.0
network 10.10.3.0/24 area 0.0.0.0
network 10.10.2.0/24 area 0.0.0.0
this is my ifconfig output:
ctc0 Link encap:Serial Line IP
inet addr:10.10.3.1 P-t-P:10.10.3.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MTU:32760 Metric:1
RX packets:210 errors:0 dropped:0 overruns:0 frame:0
TX packets:224 errors:16 dropped:16 overruns:0 carrier:16
collisions:0 txqueuelen:100
RX bytes:15008 (14.6 KiB) TX bytes:16532 (16.1 KiB)
dummy0 Link encap:Ethernet HWaddr 92:C9:FC:44:84:11
inet addr:172.20.101.1 Bcast:172.20.101.3 Mask:255.255.255.252
inet6 addr: fe80::90c9:fcff:fe44:8411/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 02:00:00:00:00:03
inet addr:172.20.140.13 Bcast:172.20.140.255 Mask:255.255.255.0
inet6 addr: fe80::200:0:200:3/64 Scope:Link
UP BROADCAST RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:2923 errors:0 dropped:0 overruns:0 frame:0
TX packets:1562 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:242871 (237.1 KiB) TX bytes:201379 (196.6 KiB)
hsi0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:10.10.2.36 Bcast:10.10.2.255 Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING NOARP MULTICAST MTU:16384 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:195 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:12256 (11.9 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:648 errors:0 dropped:0 overruns:0 frame:0
TX packets:648 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:51461 (50.2 KiB) TX bytes:51461 (50.2 KiB)
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
