>>> On 1/16/2009 at 11:41 AM, Ray Waters <[email protected]> wrote: -snip- > Once the SLES exec is complete, IPL 150 does not work. What am I missing? > Do I have to LOGIN via PUTTY EXEC to 172.16.24.107 and run some kind of > program named YaST? If so where do I go from there and what do I enter? There > are no further instructions in this manual
Well, that is what the system is telling you to do, so yes. :) The actual Linux installation process is covered in other documents, so we definitely didn't want to reproduce them in the starter system doc. That's why we have Appendix D, which talks about what other things you need to look at. In particular, http://www.novell.com/documentation/sles10/sles_admin/sles_admin.pdf If you're interested in cloning and such, the IBM Redbook Virtualization Cookbook is another good place. Simply use the starter system as the network installation source it talks about. http://www.redbooks.ibm.com/redbooks/pdfs/sg247493.pdf Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
