Well that fixed the problem of the device not coming online at IPL. But now all the dasd labels have been changed. 0200 was dasda now dasdc 0201 was dasdb now dasdd 0202 was dasdc now dasda 0203 was dasdd now dasdb
root dasd mounts fine because it is mounted "by-path", but the swap disk were by /dev/dasdx1 and now obviously that is incorrect. Also the LVM doesn't mount as 0203 is no longer /dev/dasdd1. What, now, determines the order? On Tue, Apr 7, 2009 at 11:01 AM, Bruce Hayden <[email protected]> wrote: > I think, in SLES 11, you either must use Yast to add disks, or to use > the scripts supplied by Novell that Yast calls. The script to add > dasd is dasd_configure, and if you run it without any arguments, it > shows this help: > Usage: /sbin/dasd_configure <ccwid> <online> <use_diag> > For your use, you'd enter: dasd_configure 0.0.0203 1 0 > This will create the needed udev rules so that the device will be > placed online at boot time. I don't think I'd recommend copying or > editing the rules files directly. By the way, the dasd_configure > script also exists in SLES 10, but it created the hardware > configuration files in /etc/sysconfig/hardware instead. > > On Tue, Apr 7, 2009 at 10:24 AM, Mark Pace <[email protected]> wrote: > > Hmmmm - new stuff in SLES11 - > > Found /etc/udev/rules.d > > copied 51-dasd-0.0.0202.rules to 51-dasd-0.0.0203.rules and then edited > the > > file and changed all occurances of 202 to 203, reboot, now difference. > > udev is not bringing 203 online at IPL. > > > > On Tue, Apr 7, 2009 at 9:16 AM, Mark Pace <[email protected]> wrote: > > > >> Working on a new SLES11 install. > >> I added a new disk as an LVM volume. After I had the LV setup and > working > >> I did an > >> mkinitrd > >> zipl > >> > >> When I reboot it does not find the disk and stops. > >> I can do > >> chccwdev --online 0.0.0203 > >> mount -a > >> and the disk comes online and mounts fine. I added dasd=0200-021f > to > >> the zipl parameters, another mkinitd and zipl, but the disk still is > not > >> online at boot time. > >> > >> What have I forgotten to do? > >> > >> -- > >> Mark Pace > >> Mainline Information Systems > >> 1700 Summit Lake Drive > >> Tallahassee, FL. 32317 > >> > > > > > > > > -- > > Mark Pace > > Mainline Information Systems > > 1700 Summit Lake Drive > > Tallahassee, FL. 32317 > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO LINUX-390 or > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > > > -- > Bruce Hayden > Linux on System z Advanced Technical Support > IBM, Endicott, NY > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
