I can tell you from experience that it does run on a z10 under z/VM 5.4. Of course, that'd be unsupported so it was a test, only a test. If it had been an actual workload you would have been instructed to go to ...
Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Tom Duerbusch Sent: Friday, May 01, 2009 2:34 PM To: [email protected] Subject: [LINUX-390] z10 and SLES 8 In one of the Linux session documentation (PDF), it says that for the z10 "System z10 Toleration" for SLES 8....NO. Does that mean that you can't run SLES8 on a z10 box? At all? Or that the z10 runs SLES10, for example, better? I have a few SLES8 images, more historic in nature. I wouldn't want to kill them off, but I'm also not sure that it would be worth the effort to migrate them. Not that a z10 is in the near future, but you still have to plan.... Thanks Tom Duerbusch THD Consulting ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
