Qeth.3qacf0c: 0.0.a100: The qeth device driver failed to recover an error on the device
Frank Skellen The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. -----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Mark Post Sent: Wednesday, June 03, 2009 2:19 PM To: [email protected] Subject: Re: sless11 under zvm using hipersockets >>> On 6/3/2009 at 1:43 PM, Frank Skellen <[email protected]> wrote: > I am having problems with sles11 hipersockets on a z9. I have sles10 > sp2 using hipersockets just fine. When attempting the same > configuration for suse11 I cannot get the base name hsiX interface to > come up. I issue "# echo 1 > > /sys/bus/ccwgroup/drivers/qeth/0.0.a100/online" What shows up in the kernel ring buffer? "dmesg" Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
