> What would I need to change to make sure this works. First thing, download and run www.sinenomine.net/download/sane-dasd-update to change the by-id references you have in your /etc/fstab to by-path BEFORE you lose the old disks. The way things are now, your system is irrevocably linked to the physical disk ids it's installed on, and it WILL NOT BOOT if you copy it to another disk. If you can, get them to define the disks at the same addresses in the new LPAR. Then you can shut down the Linux system completely, and use ADRDSSU or DDR (if you have VM) to copy the disks over.
FSTAB has entries but they seem to be only the last two digits of the 4 character hex UCB. For example: /dev/disk/by-id/ccw-HTC.55000000010957.4c14.ee-part1 Where the UCB is E4EE. Second I know I can use vgexport for the lvm, but would that be all? Lastly how can I check if hyper-pav is enabled? Thanks! -Paul ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
