On 08/11/2009 04:54 PM, Brad Hinson wrote: > As to why layer3/IP mode isn't working, it could be my setup, but I > noticed this on the console when I brought the nic online with echo 1 > > /sys/bus/...: > > HCPIPN2833E Error 'E00A'X adding IP address 192.168.7.3 for VSWITCH > SYSTEM VSW2. > HCPIPN2833E IP address is already in use on the LAN. > > which is strange because I'm working with 'lan mylan' but a vswitch
I could have sworn this only happens if you have a NIC coupled to a layer3 VSWITCH with a real OSA as uplink but not a GuestLAN (without uplink). > (with guests on a different subnet) is complaining about IP address in > use. I should note that I couldn't get this working with either ARP=no > or ARP=yes in ifcfg-ethX, but the error only appeared when I set ARP=yes. > RHEL 5.3 > z/VM 5.2, level 0602 Probably UM32042 (APAR VM64162) is missing?: http://kbase.redhat.com/faq/docs/DOC-16784 (somewhat related: http://kbase.redhat.com/faq/docs/DOC-16786) Steffen Linux on System z Development IBM Deutschland Research & Development GmbH Vorsitzender des Aufsichtsrats: Martin Jetter Geschäftsführung: Erich Baier Sitz der Gesellschaft: Böblingen Registergericht: Amtsgericht Stuttgart, HRB 243294 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
