Yes, we are running z/VM version 5.3. I think we have all the required 
maintenance to run OSA-EXPRESS3 for z/VM 5.3 applied all.

The following PTF are currently applied : UK37960, UK41398, UM32407, UM32565, 
UM32615, UM32140, UM32223, UM32239, UM32210, UM32497, UM32482

The only missing PTF that is not installed is UM32615.

It quite not obvious what is missing and why layer2 interface is not working.

Thank you,
Ashwin
Read below for various maintenances that are installed .

----------------------------------------------------------------------------
cp query vmlan
VMLAN maintenance level:
  Latest Service: VM64463
VMLAN MAC address assignment:
  MACADDR Prefix: 020000
  MACIDRANGE SYSTEM: 000001-FFFFFF
             USER:   000000-000000
VMLAN default accounting status:
  SYSTEM Accounting: OFF       USER Accounting: OFF
VMLAN general activity:
  PERSISTENT Limit: INFINITE   Current: 2
  TRANSIENT  Limit: INFINITE   Current: 0
----------------------------------------------------------------------------
qeth: Device 0.0.0700/0.0.0701/0.0.0702 is a Guest LAN QDIO card (level: V534) 
with link type GuestLAN QDIO (portname: )
qeth: MAC address 02:00:00:00:00:03 successfully registered on device eth0
qeth: Device 0.0.0800/0.0.0801/0.0.0802 is a Guest LAN QDIO card (level: V534) 
with link type GuestLAN QDIO (portname: )
----------------------------------------------------------------------------
netstat tcp DTCVSW1    level
VM TCP/IP Netstat Level 530

IBM 2097; z/VM Version 5 Release 3.0, service level 0901 (64-bit), VM TCP/IP 
Level 530; RSU 0901 running TCPIP MODULE E2 dated 02/05/09 at 15:08
TCP/IP Module Load Address:  00C2E000
----------------------------------------------------------------------------

service all stat UK37960
VMFSRV2760I SERVICE processing started
DASD 0491 LINKED R/W; R/O BY     4 USERS
DASD 0492 LINKED R/W; R/O BY     4 USERS
VMFSRV1226I TCPIP (5VMTCP30%TCPIP) PTF UK37960 status:
VMFSRV1226I    RECEIVED  07/21/09 17:26:45
VMFSRV1226I    APPLIED   09/27/08 00:26:20
VMFSRV1226I    BUILT     07/21/09 17:29:10
VMFSRV1226I    PUT2PROD  08/04/09 15:15:33
VMFSRV2760I SERVICE processing completed successfully
Ready; T=1.73/1.79 22:22:22

service all stat UK41398
VMFSRV2760I SERVICE processing started
DASD 0491 LINKED R/W; R/O BY     4 USERS
DASD 0492 LINKED R/W; R/O BY     4 USERS
VMFSRV1226I TCPIP (5VMTCP30%TCPIP) PTF UK41398 status:
VMFSRV1226I    RECEIVED  07/21/09 17:26:45
VMFSRV1226I    APPLIED   02/05/09 15:08:20
VMFSRV1226I    BUILT     07/21/09 17:29:10
VMFSRV1226I    PUT2PROD  08/04/09 15:15:33
VMFSRV2760I SERVICE processing completed successfully
Ready; T=1.73/1.79 22:22:42

service all stat UM32407
VMFSRV2760I SERVICE processing started
VMFSRV1226I CP (5VMCPR30%CP) PTF UM32407 status:
VMFSRV1226I    RECEIVED  07/21/09 17:25:55
VMFSRV1226I    SUPED     02/05/09 15:06:17
VMFSRV1226I    BUILT     07/21/09 17:29:10
VMFSRV1226I    PUT2PROD  08/04/09 15:15:58
VMFSRV2760I SERVICE processing completed successfully
Ready; T=0.44/0.45 22:33:21

service all stat UM32565
VMFSRV2760I SERVICE processing started
VMFSRV1226I CP (5VMCPR30%CP) PTF UM32565 status:
VMFSRV1226I    RECEIVED  07/21/09 17:25:55
VMFSRV1226I    SUPED     02/05/09 15:06:17
VMFSRV1226I    BUILT     07/21/09 17:29:10
VMFSRV1226I    PUT2PROD  08/04/09 15:15:58
VMFSRV2760I SERVICE processing completed successfully


service all stat UM32615
VMFSRV2760I SERVICE processing started
DASD 0491 LINKED R/W; R/O BY     4 USERS
DASD 0492 LINKED R/W; R/O BY     4 USERS
DASD 0200 LINKED R/W; R/O BY PERFSVM
DASD 0201 LINKED R/W; R/O BY     2 USERS
DASD 01CC LINKED R/W; R/O BY PERFSVM
DASD 029D LINKED R/W; R/O BY PERFSVM
VMFSRV1227I UM32615 is not received or applied
VMFSRV2760I SERVICE processing completed successfully
Ready; T=2.88/3.00 22:36:59

service all stat UM32615
VMFSRV2760I SERVICE processing started
DASD 0491 LINKED R/W; R/O BY     4 USERS
DASD 0492 LINKED R/W; R/O BY     4 USERS
DASD 0200 LINKED R/W; R/O BY PERFSVM
DASD 0201 LINKED R/W; R/O BY     2 USERS
DASD 01CC LINKED R/W; R/O BY PERFSVM
DASD 029D LINKED R/W; R/O BY PERFSVM
VMFSRV1227I UM32615 is not received or applied
VMFSRV2760I SERVICE processing completed successfully

service all stat UM32140
VMFSRV2760I SERVICE processing started
VMFSRV1226I CP (5VMCPR30%CP) PTF UM32140 status:
VMFSRV1226I    RECEIVED  12/19/07 18:20:39
VMFSRV1226I    APPLIED   11/26/07 19:24:38
VMFSRV1226I    BUILT     12/19/07 18:32:38
VMFSRV1226I    PUT2PROD  12/20/07 15:17:17
VMFSRV2760I SERVICE processing completed successfully
Ready; T=0.44/0.45 22:40:03

service all stat UM32223
VMFSRV2760I SERVICE processing started
VMFSRV1226I CP (5VMCPR30%CP) PTF UM32223 status:
VMFSRV1226I    RECEIVED  07/21/09 17:25:55
VMFSRV1226I    APPLIED   04/28/08 19:26:49
VMFSRV1226I    BUILT     07/21/09 17:29:10
VMFSRV1226I    PUT2PROD  08/04/09 15:15:58
VMFSRV2760I SERVICE processing completed successfully
Ready; T=0.44/0.45 22:41:16


service all stat UM32239
VMFSRV2760I SERVICE processing started
VMFSRV1226I CP (5VMCPR30%CP) PTF UM32239 status:
VMFSRV1226I    RECEIVED  07/21/09 17:25:55
VMFSRV1226I    APPLIED   09/27/08 00:28:20
VMFSRV1226I    BUILT     07/21/09 17:29:10
VMFSRV1226I    PUT2PROD  08/04/09 15:15:58
VMFSRV2760I SERVICE processing completed successfully
Ready; T=0.44/0.45 22:41:59

service all stat UM32210
VMFSRV2760I SERVICE processing started
VMFSRV1226I CP (5VMCPR30%CP) PTF UM32210 status:
VMFSRV1226I    RECEIVED  07/21/09 17:25:55
VMFSRV1226I    APPLIED   09/27/08 00:28:20
VMFSRV1226I    BUILT     07/21/09 17:29:10
VMFSRV1226I    PUT2PROD  08/04/09 15:15:58
VMFSRV2760I SERVICE processing completed successfully
Ready; T=0.44/0.46 22:42:13

service all stat UM32497
VMFSRV2760I SERVICE processing started
VMFSRV1226I CP (5VMCPR30%CP) PTF UM32497 status:
VMFSRV1226I    RECEIVED  07/21/09 17:25:55
VMFSRV1226I    SUPED     02/05/09 15:06:17
VMFSRV1226I    BUILT     07/21/09 17:29:10
VMFSRV1226I    PUT2PROD  08/04/09 15:15:58
VMFSRV2760I SERVICE processing completed successfully
Ready; T=0.44/0.45 22:43:07

service all stat UM32482
VMFSRV2760I SERVICE processing started
VMFSRV1226I CP (5VMCPR30%CP) PTF UM32482 status:
VMFSRV1226I    RECEIVED  07/21/09 17:25:55
VMFSRV1226I    SUPED     02/05/09 15:06:17
VMFSRV1226I    BUILT     07/21/09 17:29:10
VMFSRV1226I    PUT2PROD  08/04/09 15:15:58
VMFSRV2760I SERVICE processing completed successfully
Ready; T=0.44/0.46 22:43:17

----------------------------------------------------------------------------


-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Marcy 
Cortes
Sent: Thursday, October 01, 2009 7:07 PM
To: [email protected]
Subject: Re: Linux vswitch layer2 OSA-Express2 (z9 ) to OSA-EXPRESS3 1000T (z10 
) migration issue

Looks like you are z/VM 5.3?
If so, did you install the required maintenance to support Express3 cards?


Marcy

"This message may contain confidential and/or privileged information. If you 
are not the addressee or authorized to receive this for the addressee, you must 
not use, copy, disclose, or take any action based on this message or any 
information herein. If you have received this message in error, please advise 
the sender immediately by reply e-mail and delete this message. Thank you for 
your cooperation."


-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Bhemidhi, 
Ashwin
Sent: Thursday, October 01, 2009 4:30 PM
To: [email protected]
Subject: [LINUX-390] Linux vswitch layer2 OSA-Express2 (z9 ) to OSA-EXPRESS3 
1000T (z10 ) migration issue

Hello all,

We recently moved our working z/VM Linux LPAR from z9 to z10. After the move 
our Linux guest systems are unable to use a layer 2 VSWITCH device. Our Linux 
guest has 2 layer2 NIC interface eth0 and eth1 defined. NIC eth0 is used for IP 
and NIC eth1 only does LLC over Ethernet (no IP) and is used to communication 
with Cisco SNA switch router.  After the VM LPAR move IP NIC interface eth0 
works but not the LLC NIC interface eth1 work. I am confused why only the IP 
interface is working and the LLC even though both of them were defined as 
Layer2 VSWITCH. I do see a "qeth: received an IDX TERMINATE with cause code 
0xf6" error though. I know something is not right about the OSA but am unable 
to determine what it is.


I have checked all my definitions over and over again. I am trying to figure 
out why something that was working before on z9 is not working on z10. Below 
are the VSWITCH definitions and query details.

Thank you,
Ashwin Bhemidhi


Kernel

Linux zvticc02 2.6.18-164.el5 #1 SMP Tue Aug 18 15:53:50 EDT 2009 s390x s390x 
s390x GNU/Linux



Linux dmesg show error during qeth initialization.

qeth: sense data available on channel 0.0.0800.
qeth:  cstat 0x0
 dstat 0xE
qeth: irb: 00 c2 60 17  06 25 10 38  0e 00 10 00  00 80 00 00
qeth: irb: 01 02 00 00  00 00 00 00  00 00 00 00  00 00 00 00
qeth: sense data: 02 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00
qeth: sense data: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00
qeth: Initialization in hardsetup failed! rc=-5
qeth: received an IDX TERMINATE with cause code 0xf6
/VM
qeth: sense data available on channel 0.0.0700.
qeth:  cstat 0x0
 dstat 0xE
qeth: irb: 00 c2 60 17  04 06 b0 38  0e 00 10 00  00 80 00 00
qeth: irb: 01 02 00 00  00 00 00 00  00 00 00 00  00 00 00 00
qeth: sense data: 02 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00
qeth: sense data: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00
qeth: Initialization in hardsetup failed! rc=-5


qeth: Device 0.0.0700/0.0.0701/0.0.0702 is a Guest LAN QDIO card (level: V534)
with link type GuestLAN QDIO (portname: )
qeth: MAC address 02:00:00:00:00:03 successfully registered on device eth0
qeth: Device 0.0.0800/0.0.0801/0.0.0802 is a Guest LAN QDIO card (level: V534)
with link type GuestLAN QDIO (portname: )
qeth: MAC address 02:00:00:00:00:04 successfully registered on device eth1

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Vswitch definitions:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Define commands:

CP DEF VSWITCH VSWITCHI RDEV 3604.P1 3500.P1 ETHERNET VLAN 1000 NAT 1000,
PORTTYPE TRUNK  PORTNAME OSA3500 OSA3600
CP DEF VSWITCH VSWITCHE RDEV 3600.P1 3504.P1 ETHERNET VLAN 1000 NAT 1000,
PORTTYPE TRUNK  PORTNAME OSA3500 OSA3600

Grant commands:

cp set vswitch vswitchi grant linux02 porttype access vlan 730
cp set vswitch vswitche grant linux02 porttype access vlan 106



---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
VSWITCH query details:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
q vswitch vswitchi det

VSWITCH SYSTEM VSWITCHI Type: VSWITCH Connected: 1    Maxconn: INFINITE
  PERSISTENT  RESTRICTED    ETHERNET                  Accounting: OFF
  VLAN Aware  Default VLAN: 1000    Default Porttype: Trunk   GVRP: Enabled
              Native  VLAN: 1000
  MAC address: 02-00-00-00-00-01
  State: Ready
  IPTimeout: 5         QueueStorage: 8
  Isolation Status: OFF
  Portname: OSA3500    RDEV: 3604.P01 Controller: DTCVSW1  VDEV:  3604
    VSWITCH Connection:
      RX Packets: 990        Discarded: 0          Errors: 0
      TX Packets: 763        Discarded: 0          Errors: 0
      RX Bytes: 99670                TX Bytes: 163198
      Device: 3606  Unit: 002   Role: DATA       vPort: 0001  Index: 0001
  Portname: OSA3600    RDEV: 3500.P01 Controller: DTCVSW2  VDEV:  3500 BACKUP
  Adapter Connections:
    Adapter Owner: LINUX02  NIC: 0700.P00 Name: UNASSIGNED
      Porttype: Access
      RX Packets: 2920       Discarded: 0          Errors: 0
      TX Packets: 763        Discarded: 0          Errors: 0
      RX Bytes: 207890               TX Bytes: 163198
      Device: 0702  Unit: 002   Role: DATA       vPort: 0065  Index: 0003
      VLAN: 0730
      Options: Ethernet Broadcast
        Unicast MAC Addresses:
          02-00-00-00-00-03 IP: 157.170.179.198
        Multicast MAC Addresses:
          01-00-5E-00-00-01 IP: 224.0.0.1
          01-00-5E-00-00-FB IP: 224.0.0.251
          33-33-00-00-00-01 IP: FF02::1
          33-33-00-00-00-FB IP: FF02::FB
          33-33-FF-00-00-03 IP: FF02::FF00:3



q vswitch vswitche det

VSWITCH SYSTEM VSWITCHE Type: VSWITCH Connected: 1    Maxconn: INFINITE
  PERSISTENT  RESTRICTED    ETHERNET                  Accounting: OFF
  VLAN Aware  Default VLAN: 1000    Default Porttype: Trunk   GVRP: Enabled
              Native  VLAN: 1000
  MAC address: 02-00-00-00-00-02
  State: Ready
  IPTimeout: 5         QueueStorage: 8
  Isolation Status: OFF
  Portname: OSA3500    RDEV: 3600.P01 Controller: DTCVSW2  VDEV:  3600
    VSWITCH Connection:
      RX Packets: 0          Discarded: 0          Errors: 0
      TX Packets: 927        Discarded: 0          Errors: 0
      RX Bytes: 0                    TX Bytes: 69635
      Device: 3602  Unit: 002   Role: DATA       vPort: 0001  Index: 0001
  Portname: OSA3600    RDEV: 3504.P01 Controller: DTCVSW1  VDEV:  3504 BACKUP
  Adapter Connections:
    Adapter Owner: LINUX02  NIC: 0800.P00 Name: UNASSIGNED
      Porttype: Access
      RX Packets: 0          Discarded: 0          Errors: 0
      TX Packets: 927        Discarded: 0          Errors: 0
      RX Bytes: 0                    TX Bytes: 69635
      Device: 0802  Unit: 002   Role: DATA       vPort: 0065  Index: 0003
      VLAN: 0106
      Options: Ethernet Broadcast
        Unicast MAC Addresses:
          02-00-00-00-00-04
        Multicast MAC Addresses:
          33-33-00-00-00-01 IP: FF02::1
          33-33-00-00-00-FB IP: FF02::FB
          33-33-FF-00-00-04 IP: FF02::FF00:4

#CP Q NIC DET

Adapter 0700.P00 Type: QDIO      Name: UNASSIGNED  Devices: 3
  MAC: 02-00-00-00-00-03         VSWITCH: SYSTEM VSWITCHI
      RX Packets: 3006       Discarded: 0          Errors: 0
      TX Packets: 764        Discarded: 0          Errors: 0
      RX Bytes: 212702               TX Bytes: 163248
  Connection Name: HALLOLE   State: Session Established
      Device: 0700  Unit: 000   Role: CTL-READ
      Device: 0701  Unit: 001   Role: CTL-WRITE
      Device: 0702  Unit: 002   Role: DATA       vPort: 0065  Index: 0003
      VLAN: 0730
      Options: Ethernet Broadcast
        Unicast MAC Addresses:
          02-00-00-00-00-03
        Multicast MAC Addresses:
          01-00-5E-00-00-01 IP: 224.0.0.1
          01-00-5E-00-00-FB IP: 224.0.0.251
          33-33-00-00-00-01 IP: FF02::1
          33-33-00-00-00-FB IP: FF02::FB
          33-33-FF-00-00-03 IP: FF02::FF00:3
Adapter 0800.P00 Type: QDIO      Name: UNASSIGNED  Devices: 3
  MAC: 02-00-00-00-00-04         VSWITCH: SYSTEM VSWITCHE
      RX Packets: 0          Discarded: 0          Errors: 0
      TX Packets: 1019       Discarded: 0          Errors: 0
      RX Bytes: 0                    TX Bytes: 75523
  Connection Name: HALLOLE   State: Session Established
      Device: 0800  Unit: 000   Role: CTL-READ
      Device: 0801  Unit: 001   Role: CTL-WRITE
      Device: 0802  Unit: 002   Role: DATA       vPort: 0065  Index: 0003
      VLAN: 0106
      Options: Ethernet Broadcast
        Unicast MAC Addresses:
          02-00-00-00-00-04
        Multicast MAC Addresses:
          33-33-00-00-00-01 IP: FF02::1
          33-33-00-00-00-FB IP: FF02::FB
          33-33-FF-00-00-04 IP: FF02::FF00:4


----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to