Thanks to everyone who's replied. I followed the process that was sent in
http://www.linuxvm.org/Info/HOWTOs/movefs.html
with the following deviation: I had already used yast to activate and format
the disk as ReiserFS, and assigned it a mountpoint of /usrnew. I've followed
steps 4 and 5. The yast process had already updated /etc/fstab to include the
new disk with the /usrnew mount. For step 7, after the "tar" command was done,
I edited /etc/fstab to change the mountpoint of /usrnew to /usr, and changed
the old /usr to /usrsp2. I then rebooted.
"df -h" doesn't show /usrsp2, even though there was an entry for it in
/etc/fstab. I then check the partitioner in yast and there is an * besides it
name in the column that has the mountpoint name. The /usr below is the new
/usr that was just created. The old /usr, which I had updated /etc/fstab with
a mountpoint of /usrsp2 doesn't show up under "mount" either.
Question 1: What is happening that I can't see the old /usr, which I thought
would have been mounted under /usrsp2?
Question 2: Is everything OK?
Question 3: Why do I still see /usrnew, which is not mounted? It's possible
that when I was trying a 'mv" yesterday it was created by me.
Question 4: I'm not sure of the purpose of step 8 in the HOWTO. I did the
"telinit 1" and then the umount comes back with 'umount: /usr: device is busy',
which I think subsequently killed the system. If the old /usr is on a disk
that isn't mounted, is it necessary to delete what's on it, since the disk will
probably be return to the VM guys for other purposes.
Question 5: Is everything OK as it now sits?
"df -h":
Filesystem Size Used Avail Use% Mounted on
/dev/dasdb1 1.2G 158M 1016M 14% /
udev 184M 200K 184M 1% /dev
/dev/dasda1 69M 14M 52M 21% /boot
/dev/dasdh1 2.3G 85M 2.3G 4% /home
/dev/dasdg1 1.2G 843M 331M 72% /opt
/dev/dasdd1 1.1G 323M 711M 32% /var
/dev/mapper/tmpvg-tmpvol
14G 98M 14G 1% /tmp
/dev/dasdq1 2.3G 33M 2.3G 2% /unused
/dev/dasdp1 4.6G 1.9G 2.8G 41% /usr
"mount":
/dev/dasdb1 on / type reiserfs (rw,acl,user_xattr) proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/dasda1 on /boot type ext2 (rw,acl,user_xattr)
/dev/dasdh1 on /home type reiserfs (rw,acl,user_xattr)
/dev/dasdg1 on /opt type reiserfs (rw,acl,user_xattr)
/dev/dasdd1 on /var type reiserfs (rw,acl,user_xattr) /dev/mapper/tmpvg-tmpvol
on /tmp type reiserfs (rw,acl,user_xattr)
/dev/dasdq1 on /unused type reiserfs (rw,acl,user_xattr)
/dev/dasdp1 on /usr type reiserfs (rw,acl,user_xattr)
"l" command:
total 33
drwxr-xr-x 30 root root 728 2010-01-06 13:40 ./
drwxr-xr-x 30 root root 728 2010-01-06 13:40 ../
drwxr-xr-x 2 root root 2384 2009-04-23 15:10 bin/
drwxr-xr-x 4 root root 4096 2010-01-06 13:40 boot/
drwx------ 8 20631 uuxstaff 584 2009-04-23 15:17 candle/
drwxr-xr-x 9 root root 2800 2010-01-06 13:40 dev/
drwxr-xr-x 81 root root 6928 2010-01-06 13:40 etc/
drwxr-xr-x 16 root root 400 2009-10-23 05:32 home/
lrwxrwxrwx 1 root root 5 2009-05-01 13:35 homedir -> /home/
drwxr-xr-x 10 root root 3808 2009-04-23 09:49 lib/
drwxr-xr-x 5 root root 4720 2009-11-11 11:49 lib64/
drwxr-xr-x 5 root root 128 2009-06-19 10:10 local/
drwxr-xr-x 2 root root 48 2009-06-10 11:39 .mc/
drwxr-xr-x 2 root root 48 2007-05-03 11:05 media/
drwxr-xr-x 3 root root 72 2009-04-23 10:46 mnt/
drwxr-xr-x 11 root root 248 2009-08-27 08:26 opt/
dr-xr-xr-x 68 root root 0 2010-01-06 13:40 proc/
drwx------ 12 root root 536 2010-01-06 11:23 root/
drwxr-xr-x 3 root root 9568 2009-05-07 07:14 sbin/
drwxr-xr-x 4 root root 96 2009-04-23 09:45 srv/
drwxr-xr-x 3 root root 72 2009-05-06 20:31 stage/
drwxr-xr-x 2 root root 48 2009-05-11 10:40 swap/
drwxr-xr-x 3 root root 72 2009-05-06 15:38 .swdis/
drwxr-xr-x 11 root root 0 2010-01-06 13:40 sys/
drwxrwxrwt 24 root root 1288 2010-01-06 14:00 tmp/
drwxr-xr-x 4 root root 80 2010-01-05 15:54 unused/
drwxr-xr-x 16 root root 424 2009-04-23 11:24 usr/
drwxr-xr-x 2 root root 48 2010-01-05 15:08 usrnew/
drwxr-xr-x 16 root root 392 2009-09-02 11:52 var/
||-----Original Message-----
||From: Linux on 390 Port [mailto:[email protected]] On Behalf Of
||Scott Rohling
||Sent: Wednesday, January 06, 2010 10:55 AM
||To: [email protected]
||Subject: Re: SLES 10 SP2 upgrade to SLES 10 SP3 error
||
||Good points .. you're right - that would have been messy.
||
||And actually - since these are mount points -- no rename is really
||necessary
||-- just mount the correct device under /usr.
||
||Scot
||
||On Wed, Jan 6, 2010 at 9:47 AM, Kim Goldenberg <[email protected]>
||wrote:
||
||> On 01/06/2010 11:20 AM, Scott Rohling wrote:
||>
||>> 2) Just use 'mv' .. mv /usr /usrold mv /usrnew /usr
|..
||>> it's just a rename.
||>>
||>> a) If you were to use this, it would be
||>
||> mv -r /usr /usrnew
||>
||> note the "-r" to recurs to lower directories.
||>
||> b) If it were on one mount point, it would be a rename, but would
||change
||> the ownership to the
||> user and group executing the command. As the OP said this was between
||> mount point, this would
||> be an actual move, with the same caveat as previous. It would also
||wreak
||> havok on any links,
||> hard or soft.
||>
||> Kim
||>
||>
||> ---------------------------------------------------------------------
|-
||> For LINUX-390 subscribe / signoff / archive access instructions,
||> send email to [email protected] with the message: INFO LINUX-390
||or
||> visit
||> http://www.marist.edu/htbin/wlvindex?LINUX-390
||>
||
||----------------------------------------------------------------------
||For LINUX-390 subscribe / signoff / archive access instructions,
||send email to [email protected] with the message: INFO LINUX-390
|or
||visit
||http://www.marist.edu/htbin/wlvindex?LINUX-390
