It goes into the udev configuration - in this case a file named "/etc/udev/rules.d/51-dasd-0.0.0210.rules" should have been created.
I believe YaST takes care of this as well, if you choose to go through YaST, but I'm not absolutely sure about that one. On Mon, Mar 29, 2010 at 9:38 AM, Agblad Tore <[email protected]> wrote: > Thank's a lot ! > That did the trick. > Does this mean I have to do this every time I add a disk, or was it because > I used > native cmds instead of yast ? > Yast ( or dasd_configure ) must be putting this info in some hidden place > ?? > > Cordialement / Vriendelijke Groeten / Best Regards / Med Vänliga Hälsningar > Tore Agblad > > Volvo Information Technology > Infrastructure Mainframe Design & Development > SE-405 08, Gothenburg Sweden > E-mail: [email protected] > > http://www.volvo.com/volvoit/global/en-gb/ > ________________________________________ > From: Linux on 390 Port [[email protected]] On Behalf Of Christian > Paro [[email protected]] > Sent: Monday, March 29, 2010 15:29 > To: [email protected] > Subject: Re: SLES11 one disk is not online at boot, mount fails (of course) > > I believe that for SLES 11 zipl.conf is no longer used to determine which > dasd to online at boot. Instead, however, you can run `dasd_configure > 0.0.0210 1` before you run mkinitrd and zipl, and the specified disk should > be set online and come back online on subsequent boots. > > On Mon, Mar 29, 2010 at 8:50 AM, Agblad Tore <[email protected]> > wrote: > > > I can't say I remember it, but I usually do due to prev. mistakes.... > > However, after making disk online and mounting everything, I have run > > mkinitrd and zipl. > > Also compared the result with the clone base machine, and it looks the > > same. > > It seams SLES11 does not save all disks in zipl config, just the boot > > device... hmmm > > > > I'm suspicious here, but don't know what to look for... > > > > > > Cordialement / Vriendelijke Groeten / Best Regards / Med Vänliga > Hälsningar > > Tore Agblad > > > > Volvo Information Technology > > Infrastructure Mainframe Design & Development > > SE-405 08, Gothenburg Sweden > > E-mail: [email protected] > > > > http://www.volvo.com/volvoit/global/en-gb/ > > ________________________________________ > > From: Linux on 390 Port [[email protected]] On Behalf Of Bernie Wu > [ > > [email protected]] > > Sent: Monday, March 29, 2010 14:36 > > To: [email protected] > > Subject: Re: SLES11 one disk is not online at boot, mount fails (of > course) > > > > Hi Tore, > > > > > chccwdev -e 210 > > > mount -a > > > > Did you run mkinitrd & zipl after bringing the disk online and mounting > it > > ? > > > > > > The information contained in this e-mail message is intended only for the > > personal and confidential use of the recipient(s) named above. This > message > > may be an attorney-client communication and/or work product and as such > is > > privileged and confidential. If the reader of this message is not the > > intended recipient or an agent responsible for delivering it to the > intended > > recipient, you are hereby notified that you have received this document > in > > error and that any review, dissemination, distribution, or copying of > this > > message is strictly prohibited. If you have received this communication > in > > error, please notify us immediately by e-mail, and delete the original > > message. > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
