I did.

However after I installed move-to-sp3 and then restarted YOU it now says
there are no patches to be applied :(

I looked at installation sources and see that the SP2 sources have been
removed but no SP3 sources have been added. 

And /etc/SuSErelease still says patchlevel 2






-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of
Ron Foster at Baldor-IS
Sent: Friday, April 23, 2010 3:03 PM
To: [email protected]
Subject: Re: SLES10 upgrade from SP2 to SP3

Just remember to put on all the SP2 patches before you select the move
to sp3 patch.

Ron

Sent from my iPhone

On Apr 23, 2010, at 1:55 PM, "Smith, Ann (ISD, IT)"
<[email protected]  > wrote:

> Once I selected the 'move-to sle10-sp3' it came up with a warning that

> said don't install until you read this:
>
> http://www.novell.com/support/documentLink.do?externalID=7004640
>
> So they are providing the doc when you select it !
>
> -----Original Message-----
> From: Linux on 390 Port [mailto:[email protected]] On Behalf Of 
> Mark Post
> Sent: Friday, April 23, 2010 2:33 PM
> To: [email protected]
> Subject: Re: SLES10 upgrade from SP2 to SP3
>
>>>> On 4/23/2010 at 01:48 PM, "Smith, Ann (ISD, IT)"
>>>> <[email protected]>
> wrote:
>> I haven't been able to locate an instructions doc for upgrading from 
>> SLES10 SP2 to SP3.
>> All I could find on the Novell website was a release notes doc.
>> Don't know why I'm having so much trouble finding an upgrade doc this

>> time around. I must just be brain dead.
>> I usually use YaST2 to do upgrades.
>> Any help would be greatly appreciated.
>
> It should be pretty straightforward.  Install all the remaining SP2 
> updates, then install the "move-to-sles10-sp3" patch.  Once that has 
> been completed you should be able to see a whole bunch of SP3 updates.
> Install them and you should be at SP3.
>
>
> Mark Post
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions, send 
> email to [email protected] with the message: INFO LINUX-390 or 
> visit http://www.marist.edu/htbin/wlvindex?LINUX-390
> ************************************************************
> This communication, including attachments, is for the exclusive use of

> addressee and may contain proprietary, confidential and/or privileged 
> information.  If you are not the intended recipient, any use, copying,

> disclosure, dissemination or distribution is strictly prohibited.  If 
> you are not the intended recipient, please notify the sender 
> immediately by return e-mail, delete this communication and destroy 
> all copies.
> ************************************************************
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions, send 
> email to [email protected] with the message: INFO LINUX-390 or 
> visit http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send
email to [email protected] with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390
************************************************************
This communication, including attachments, is for the exclusive use of 
addressee and may contain proprietary, confidential and/or privileged 
information.  If you are not the intended recipient, any use, copying, 
disclosure, dissemination or distribution is strictly prohibited.  If you are 
not the intended recipient, please notify the sender immediately by return 
e-mail, delete this communication and destroy all copies.
************************************************************

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to