I don't think it's the memory size or the lack of GRANT AUTHs for both
the VSwitches "intranet" and "intrav6". Edited for brevity:
q vswitch intranet details
VSWITCH SYSTEM INTRANET Type: VSWITCH Connected: 18 Maxconn: INFINITE
PERSISTENT RESTRICTED NONROUTER Accounting: OFF
VLAN Unaware
MAC address: 02-00-C3-00-00-01
State: Ready
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
Portname: OSD02 RDEV: 6100.P00 Controller: TCPIPOSA VDEV: 0900
VSWITCH Connection:
MAC address: 00-11-25-BD-C2-7C
RX Packets: 1188507 Discarded: 1 Errors: 0
TX Packets: 555543 Discarded: 0 Errors: 0
RX Bytes: 561860677 TX Bytes: 165763550
Device: 0900 Unit: 000 Role: DATA vPort: 0001 Index:
0001
Adapter Connections:
Adapter Owner: LINUX024 NIC: 0C00.P00 Name: UNASSIGNED
RX Packets: 0 Discarded: 0 Errors: 0
TX Packets: 9 Discarded: 0 Errors: 0
RX Bytes: 0 TX Bytes: 720
Device: 0C02 Unit: 002 Role: DATA vPort: 0086 Index:
0086
Options: Broadcast Multicast IPv6 IPv4 VLAN
Unicast IP Addresses:
141.202.200.124 MAC: 02-00-C3-00-00-33
FE80::200:C300:100:33 MAC: 02-00-C3-00-00-33 Local
Multicast IP Addresses:
224.0.0.1 MAC: 01-00-5E-00-00-01
FF02::1 MAC: 33-33-00-00-00-01
FF02::1:FF00:33 MAC: 33-33-FF-00-00-33 Local
q vswitch intrav6 details
VSWITCH SYSTEM INTRAV6 Type: VSWITCH Connected: 10 Maxconn: INFINITE
PERSISTENT RESTRICTED NONROUTER Accounting: OFF
VLAN Unaware
MAC address: 02-00-C3-00-00-02
State: Defined
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
Adapter Connections:
Adapter Owner: LINUX024 NIC: 0D00.P00 Name: UNASSIGNED
< lots of boot messaged removed >
Activating network device...
Detected: GuestLAN based on OSA (QDIO)
Trying to reach gateway 141.202.200.101...
Could not reach your default gateway 141.202.200.101
0) redo this parameter, 1) continue, 2) restart dialog, 3) halt, 4)
shell
CP Q V ALL
STORAGE = 999M
XSTORE = none
CPU 00 ID FF04E00020978000 (BASE) IFL CPUAFF SUPP
No AP Crypto Queues are available
CONS 0009 ON LDEV L000A TERM START HOST TCPIP FROM 10.132.7.197
0009 CL T NOCONT NOHOLD COPY 001 READY FORM STANDARD
0009 TO LINUX024 RDR DIST GENERAL FLASHC 000 DEST OFF
0009 FLASH CHAR MDFY 0 FCB LPP OFF
0009 3215 NOEOF OPEN 0040 NOKEEP NOMSG NAME LINUX024 CONSOLE
0009 SUBCHANNEL = 0017
RDR 000C CL * NOCONT NOHOLD EOF READY
000C 2540 CLOSED NOKEEP NORESCAN SUBCHANNEL = 0018
PUN 000D CL A NOCONT NOHOLD COPY 001 READY FORM STANDARD
000D TO LINUX024 RDR DIST GENERAL DEST OFF
000D FLASH 000 CHAR MDFY 0 FCB
000D 2540 NOEOF CLOSED NOKEEP NOMSG NONAME
000D SUBCHANNEL = 0019
PRT 000E CL A NOCONT HOLD COPY 001 READY FORM STANDARD
000E TO LINUX024 RDR DIST GENERAL FLASHC 000 DEST OFF
000E FLASH CHAR MDFY 0 FCB LPP OFF
000E 1403 NOEOF CLOSED NOKEEP NOMSG NONAME
000E SUBCHANNEL = 001A
DASD 0190 3390 VCVR01 R/O 107 CYL ON DASD 567A SUBCHANNEL = 001C
DASD 019D 3390 VCVR01 R/O 250 CYL ON DASD 567A SUBCHANNEL = 001D
DASD 019E 3390 VCVR19 R/O 600 CYL ON DASD 5604 SUBCHANNEL = 001E
DASD 0200 3390 (TEMP) R/W 20 CYL ON DASD 2B75 SUBCHANNEL = 0000
DASD 0201 3390 LNX172 R/W 3338 CYL ON DASD 2873 SUBCHANNEL = 0009
DASD 0202 3390 LNX031 R/W 3338 CYL ON DASD 2317 SUBCHANNEL = 000A
OSA 0C00 ON NIC 0C00 UNIT 000 SUBCHANNEL = 0011
0C00 DEVTYPE OSA CHPID 0E OSD
0C00 MAC 02-00-C3-00-00-33 CURRENT
0C00 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
OSA 0C01 ON NIC 0C00 UNIT 001 SUBCHANNEL = 0012
0C01 DEVTYPE OSA CHPID 0E OSD
0C01 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
OSA 0C02 ON NIC 0C00 UNIT 002 SUBCHANNEL = 0013
0C02 DEVTYPE OSA CHPID 0E OSD
0C02 QDIO ACTIVE QIOASSIST-ELIGIBLE
0C02
0C02 INP + 01 IOCNT = 00000001 ADP = 014 PROG = 000 UNAVAIL = 114
0C02 BYTES = 000000000000006E
0C02 OUT + 01 IOCNT = 00000000 ADP = 000 PROG = 000 UNAVAIL = 128
0C02 BYTES = 0000000000000000
0C02 OUT + 02 IOCNT = 00000000 ADP = 000 PROG = 000 UNAVAIL = 128
0C02 BYTES = 0000000000000000
0C02 OUT + 03 IOCNT = 00000009 ADP = 000 PROG = 009 UNAVAIL = 119
0C02 BYTES = 00000000000003F0
0C02 OUT + 04 IOCNT = 00000000 ADP = 000 PROG = 000 UNAVAIL = 128
0C02 BYTES = 0000000000000000
OSA 0D00 ON NIC 0D00 UNIT 000 SUBCHANNEL = 0014
0D00 DEVTYPE OSA CHPID 0F OSD
0D00 MAC 02-00-C3-00-00-34 CURRENT
0D00 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
OSA 0D01 ON NIC 0D00 UNIT 001 SUBCHANNEL = 0015
0D01 DEVTYPE OSA CHPID 0F OSD
0D01 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
OSA 0D02 ON NIC 0D00 UNIT 002 SUBCHANNEL = 0016
0D02 DEVTYPE OSA CHPID 0F OSD
0D02 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
In fact (using the magic of z/VM) I can system reset and IPL my RH 5.4
disks and the system boots, proving the memory is OK and the NICs are
fine. Again, highly edited for brevity:
Activating network device...
Detected: GuestLAN based on OSA (QDIO)
Trying to reach gateway 141.202.200.101...
Could not reach your default gateway 141.202.200.101
0) redo this parameter, 1) continue, 2) restart dialog, 3) halt, 4)
shell
CP SYSTEM RESET
System reset.
CP DET 201 202
0201 0202 DETACHED
CP DEF A30 201
DASD 0201 DEFINED
CP DEF A31 202
DASD 0202 DEFINED
IPL 201
zIPL v1.8.1-8.el5 interactive boot menu
0. default (linux)
1. linux
Note: VM users please use '#cp vi vmsg <input>'
Please choose (default will boot in 15 seconds):
Booting default (linux)...
Linux version 2.6.18-164.el5 ([email protected]) (gcc
version 4.1.2
20080704 (Red Hat 4.1.2-46)) #1 SMP Tue Aug 18 15:5
3:50 EDT 2009
We are running under VM (64 bit mode)
Detected 1 CPU's
Boot cpu address 0
< lots of boot messages removed >
Starting Avahi daemon...
[ OK Mtt
Setting up swapspace version 1, size = 14729 kBt
t
Red Hat Enterprise Linux Server release 5.4 (Tikanga)t
Kernel 2.6.18-164.el5 on an s390xt
t
LINUX024 login:
-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of
Ron Foster at Baldor-IS
Sent: Monday, May 24, 2010 2:54 PM
To: [email protected]
Subject: Re: Red Hat 5 Update 5 Install Failing on Network
William,
I am a SLES person instead of a Red Hat person, but...
We use vswitches for connection our Linux guests to the outside world.
I get similar
problems when I forget to authorize a newly created Linux guest to the
vswitch.
Also, is 512MB enough to do a Red Hat install? I have had a number of
problems
running the SLES installer with not enough memory.
Ron
Scully, William P wrote:
> Sorry for the long email but I cannot seem to get RH 5 Update 5 to
> install on z/VM. Whether I answer the installer's questions by hand
or
> encode them into the parm file, the results are the same: I can't
seem
> to ping the network router:
>
>
> CP Q V ALL
>
> STORAGE = 512M
>
> XSTORE = none
>
> CPU 00 ID FF04E00020978000 (BASE) IFL CPUAFF SUPP
>
> No AP Crypto Queues are available
>
> CONS 0009 ON LDEV L001D TERM START HOST TCPIP FROM 10.132.9.185
>
> 0009 CL T NOCONT NOHOLD COPY 001 READY FORM STANDARD
>
> 0009 TO SCUWI01 RDR DIST GENERAL FLASHC 000 DEST OFF
>
> 0009 FLASH CHAR MDFY 0 FCB LPP OFF
>
> 0009 3215 NOEOF OPEN 0030 NOKEEP NOMSG NAME LINUX024 CONSOLE
>
> 0009 SUBCHANNEL = 0017
>
> RDR 000C CL * NOCONT NOHOLD EOF READY
>
> 000C 2540 CLOSED NOKEEP NORESCAN SUBCHANNEL = 0018
>
> PUN 000D CL A NOCONT NOHOLD COPY 001 READY FORM STANDARD
>
> 000D TO LINUX024 PUN DIST GENERAL DEST OFF
>
> 000D FLASH 000 CHAR MDFY 0 FCB
>
> 000D 2540 NOEOF CLOSED NOKEEP NOMSG NONAME
>
> 000D SUBCHANNEL = 0019
>
> PRT 000E CL A NOCONT HOLD COPY 001 READY FORM STANDARD
>
> 000E TO LINUX024 RDR DIST GENERAL FLASHC 000 DEST OFF
>
> 000E FLASH CHAR MDFY 0 FCB LPP OFF
>
> 000E 1403 NOEOF CLOSED NOKEEP NOMSG NONAME
>
> 000E SUBCHANNEL = 001A
>
> DASD 0190 3390 VCVR01 R/O 107 CYL ON DASD 567A SUBCHANNEL =
001C
>
> DASD 019D 3390 VCVR01 R/O 250 CYL ON DASD 567A SUBCHANNEL =
001D
>
> DASD 019E 3390 VCVR19 R/O 600 CYL ON DASD 5604 SUBCHANNEL =
001E
>
> DASD 0200 9336 (VDSK) R/W 409600 BLK ON DASD VDSK SUBCHANNEL =
0000
>
> DASD 0201 3390 LNX172 R/W 3338 CYL ON DASD 2873 SUBCHANNEL =
0009
>
> DASD 0202 3390 LNX031 R/W 3338 CYL ON DASD 2317 SUBCHANNEL =
000A
>
> OSA 0C00 ON NIC 0C00 UNIT 000 SUBCHANNEL = 0011
>
> 0C00 DEVTYPE OSA CHPID 0E OSD
>
> 0C00 MAC 02-00-C3-00-00-33 CURRENT
>
> 0C00 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
>
> OSA 0C01 ON NIC 0C00 UNIT 001 SUBCHANNEL = 0012
>
> 0C01 DEVTYPE OSA CHPID 0E OSD
>
> 0C01 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
>
> OSA 0C02 ON NIC 0C00 UNIT 002 SUBCHANNEL = 0013
>
> 0C02 DEVTYPE OSA CHPID 0E OSD
>
> 0C02 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
>
> OSA 0D00 ON NIC 0D00 UNIT 000 SUBCHANNEL = 0014
>
> 0D00 DEVTYPE OSA CHPID 0F OSD
>
> 0D00 MAC 02-00-C3-00-00-34 CURRENT
>
> 0D00 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
>
> OSA 0D01 ON NIC 0D00 UNIT 001 SUBCHANNEL = 0015
>
> 0D01 DEVTYPE OSA CHPID 0F OSD
>
> 0D01 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
>
> OSA 0D02 ON NIC 0D00 UNIT 002 SUBCHANNEL = 0016
>
> 0D02 DEVTYPE OSA CHPID 0F OSD
>
> 0D02 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE
>
>
>
> rhel55
>
> 000002 FILES PURGED
>
> NO FILES CHANGED
>
> RDR FILE 0031 SENT FROM LINUX024 PUN WAS 0031 RECS 075K CPY 001 A
> NOHOLD NOKEEP
> RDR FILE 0032 SENT FROM LINUX024 PUN WAS 0032 RECS 0008 CPY 001 A
> NOHOLD NOKEEP
> RDR FILE 0033 SENT FROM LINUX024 PUN WAS 0033 RECS 119K CPY 001 A
> NOHOLD NOKEEP
> NO FILES CHANGED
>
> Linux version 2.6.18-194.el5 ([email protected])
> (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue Ma
> r 16 22:05:06 EDT 2010
>
> We are running under VM (64 bit mode)
>
> Detected 1 CPU's
>
> Boot cpu address 0
>
> Built 1 zonelists. Total pages: 131072
>
> Kernel command line: root=/dev/ram0 ro ip=off ramdisk_size=40000 mpath
>
> DASD="200-20F" HOSTNAME="linux024.ca.com"
>
> NETTYPE="qeth" IPADDR="141.202.200.124"
>
> SUBCHANNELS="0.0.0C00,0.0.0C01,0.0.0C02"
>
> NETWORK="141.202.200.0" NETMASK="255.255.255.0"
>
> SEARCHDNS="ca.com" BROADCAST="141.202.200.255"
>
> GATEWAY="141.202.200.101" DNS="141.202.1.108"
> MTU="1500"
> LAYER2=0
>
> PID hash table entries: 4096 (order: 12, 32768 bytes)
>
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>
> Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
>
>
> Memory: 499200k/524288k available (3412k kernel code, 0k reserved,
2257k
> data, 136k init)
> Write protected kernel read-only data: 0x356000 - 0x409fff
>
> Calibrating delay loop...
>
> 3670.01 BogoMIPS (lpj=18350080)
>
> Security Framework v1.0.0 initialized
>
> SELinux: Initializing.
>
> selinux_register_security: Registering secondary module capability
>
> Capability LSM initialized as secondary
>
> Mount-cache hash table entries: 256
>
> cpu 0 phys_idx=0 vers=FF ident=04E000 machine=2097 unused=8000
>
> Brought up 1 CPUs
>
> checking if image is initramfs...
>
> it is
>
> Freeing initrd memory: 9307k freed
>
> NET: Registered protocol family 16
>
> debug: Initialization complete
>
> cio: Channel measurements not available, continuing.
>
> NetLabel: Initializing
>
> NetLabel: domain hash size = 128
>
> NetLabel: protocols = UNLABELED CIPSOv4
>
> NetLabel: unlabeled traffic allowed by default
>
> NET: Registered protocol family 2
>
> IP route cache hash table entries: 16384 (order: 5, 131072 bytes)
>
> TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
>
> TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>
> TCP: Hash tables configured (established 65536 bind 32768)
>
> TCP reno registered
>
> audit: initializing netlink socket (disabled)
>
> type=2000 audit(1274721561.761:1): initialized
>
> Total HugeTLB memory allocated, 0
>
> VFS: Disk quotas dquot_6.5.1
>
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>
> Initializing Cryptographic API
>
> alg: No test for crc32c (crc32c-generic)
>
> ksign: Installing public key data
>
> Loading keyring
>
> - Added public key 3325313AE4C7EDD6
>
> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>
> io scheduler noop registered
>
> io scheduler anticipatory registered
>
> io scheduler deadline registered
>
> io scheduler cfq registered (default)
>
> brd: module loaded
>
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>
> md: bitmap version 4.39
>
> Channel measurement facility using extended format (autodetected)
>
> TCP bic registered
>
> Initializing IPsec netlink socket
>
> NET: Registered protocol family 1
>
> NET: Registered protocol family 17
>
> Initalizing network drop monitor service
>
> Freeing unused kernel memory: 136k freed
>
>
> Starting the zSeries initrd to configure networking. Version is 1.2
>
> * NOTE: To enter default or empty values press enter twice. *
>
> Activating network device...
>
> Detected: GuestLAN based on OSA (QDIO)
>
> Trying to reach gateway 141.202.200.101...
>
> Could not reach your default gateway 141.202.200.101
>
> 0) redo this parameter, 1) continue, 2) restart dialog, 3) halt, 4)
> shell
> 4
>
> Enter 'exit' at the shell prompt to get back to the installation
dialog.
>
> bash: no job control in this shell
>
> bash-3.2# ifconfig
>
> eth0 Link encap:Ethernet HWaddr 02:00:C3:00:00:33
>
> inet addr:141.202.200.124 Bcast:141.202.200.255
> Mask:255.255.255.0
> inet6 addr: fe80::200:c300:100:33/64 Scope:Link
>
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>
> TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
>
> collisions:0 txqueuelen:1000
>
> RX bytes:0 (0.0 B) TX bytes:720 (720.0 B)
>
>
> lo Link encap:Local Loopback
>
> inet addr:127.0.0.1 Mask:255.0.0.0
>
> inet6 addr: ::1/128 Scope:Host
>
> UP LOOPBACK RUNNING MTU:16436 Metric:1
>
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>
> collisions:0 txqueuelen:0
>
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
>
> bash-3.2# route -n
>
> Kernel IP routing table
>
> Destination Gateway Genmask Flags Metric Ref
Use
> Iface
> 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0
0
> lo
> 141.202.200.0 0.0.0.0 255.255.255.0 U 0 0
0
> eth0
> 0.0.0.0 141.202.200.101 0.0.0.0 UG 0 0
0
> eth0
> bash-3.2# ifconfig eth0 down
>
> bash-3.2# ifconfig eth0 up 141.202.200.124 netmask 255.255.255.0
>
> bash-3.2# route add default gw 141.202.200.101
>
> bash-3.2# ping 141.202.200.101
>
> PING 141.202.200.101 (141.202.200.101): 56 data bytes
>
>
> <hangs at this point>
>
>
>
>
> The fixed-80 parm file used is:
>
> root=/dev/ram0 ro ip=off ramdisk_size=40000 mpath
> DASD="200-20F" HOSTNAME="linux024.ca.com"
> NETTYPE="qeth" IPADDR="141.202.200.124"
> SUBCHANNELS="0.0.0C00,0.0.0C01,0.0.0C02"
> NETWORK="141.202.200.0" NETMASK="255.255.255.0"
> SEARCHDNS="ca.com" BROADCAST="141.202.200.255"
> GATEWAY="141.202.200.101" DNS="141.202.1.108" MTU="1500"
> LAYER2=0
>
>
> Advice please?
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO LINUX-390
or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
> .
>
>
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
