Luckily, it is the test system, and the production system is fine..Here is the problem:
We are on SLES9 2.6.5-7.283-s390. Last week I added a 3390-3 to the test systems LVG and it seem to work fine. Saturday I did the same thing to the production system and it has gone through several reboots no problem. I thought I did the same thing on both systems, but obviously, I didn't, the good thing is I did the prod system correctly. I tried to reboot the test system today and it sits in init 1 , NONE of the lvgs can be accessed. When a reboot occurs, Linux doesn't see volume 207(this was the vol used to increase the filsesystem) Looked at user direct and the volume(207) is there. When we looked at Linux, it showed offline but there. We can bring it online but it fails through a reboot...duhhhh Is there a way once online to restart the other services ? I cannot get to yast in my current state. Mkinitrd and zipl both show they have been rebuilt What am I missing?? Thanks Mace ----------------------------------------- ******************************************************************** The information transmitted is intended solely for the individual or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you have received this email in error please contact the sender and delete the material from any computer. ******************************************************************** ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
