When the thoughts went to a firewall problem, I don't recall that YaSTfirewall2 is enabled by default in SLES 11 SP1 was discussed. I think only networking firewalls have been discussed.
That caught me yesterday. Try YaSTfirewall2 status to see if it is running. YaSTfirewall2 stop to stop it. Then test again. Tom Duerbusch THD Consulting Sent via BlackBerry by AT&T -----Original Message----- From: Alan Altmark <alan_altm...@us.ibm.com> Sender: Linux on 390 Port <LINUX-390@VM.MARIST.EDU> Date: Thu, 15 Jul 2010 08:34:38 To: <LINUX-390@VM.MARIST.EDU> Reply-To: Linux on 390 Port <LINUX-390@VM.MARIST.EDU> Subject: Re: Strange problems adding network adapter no 2 (eth1) in SLES11 SP1 On Thursday, 07/15/2010 at 04:18 EDT, Agblad Tore <tore.agb...@volvo.com> wrote: > I checked 'routes', only one row, and now I also have moved the SLES11 SP1 > machine into the same > subnet where the SLES10 SP2 is ( that works fine with three NICs, all possible > to login via) > And no change. On a VSWITCH there is no point in having more than one virtual NIC on the same subnet (LAN segment). All you're doing is creating more work for Linux. Get rid of eth1 and eth2. I mean, it's not like you can have an isolated vNIC failure or accidentally unplug it! Alan Altmark z/VM Development IBM Endicott ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
