Dear all, The simple LDCONFIG helped to solved the problem.
Thanks a lot. Florian On Fri, Sep 24, 2010 at 7:11 AM, Marcy Cortes <[email protected] > wrote: > Run the command "ldconfig" and see if it goes away. > Marcy. Sent from my BlackBerry. > > > ----- Original Message ----- > From: Linux on 390 Port <[email protected]> > To: [email protected] <[email protected]> > Sent: Thu Sep 23 23:25:54 2010 > Subject: Re: [LINUX-390] Yast not working under SLES 10 SP2 > > Dear Mike, > > This could indeed be the case. The system run at leased several month > without any problem and now this situation happened out of the sudden. > > I tried to start zypper I get also the error message > > libgobject-2.0.so.0: cannot open shared object file: No such file or > directory > > So everything points in that direction. > > Florian > > On Thu, Sep 23, 2010 at 11:17 PM, Michael O'Reilly <[email protected] > >wrote: > > > Florian, > > > > Are you running into that problem where boot.ldconfig is set up to run > > ldconfig if /etc/ld.so.cache is older than 30 days. So it is running > during > > shutdown, but is killed off before it completes, so /etc/ld.so.conf is > not > > completely rebuilt. You'll see /var/log/messages like: > > > > /usr/sbin/hald: error while loading shared libraries: > > libgobject-2.0.so.0: cannot open shared object file: No such file or > > directory > > > > That was scheduled to be fixed in a aaa_base package in the maintenance > > web, but I don't know the latest status. > > > > > > > > Mike O'Reilly > > IBM Linux Change Team > > > > > > > > > > > > > > > > > > > > > > > > Florian Bilek > > <florian.bi...@gm > > ail.com> > To > > Sent by: Linux on [email protected] > > 390 Port cc > > <[email protected] > > ist.edu> > Subject > > Yast not working under SLES 10 SP2 > > > > 09/23/2010 01:45 > > PM > > > > > > Please respond to > > Linux on 390 Port > > <[email protected] > > ist.edu> > > > > > > > > > > > > > > Dear all, > > > > Today I was facing a quite strange problem: > > > > I recycled a SLES 10SP2 image and since then I cannot start Yast any > more. > > > > # yast > > warning: the qt frontend is installed but does not work > > warning: the ncurses frontend is installed but does not work > > You need to install yast2-ncurses to use the YaST2 text mode interface > > > > It is strange since before the reboot everything was working well. > > > > I didn't apply any fixes and especially didn't delete anything. I don't > > know > > how yast2-ncurses could be gone. > > > > Any ideas what to do? > > > > -- > > Best regards > > > > Florian Bilek > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > > For more information on Linux on System z, visit > > http://wiki.linuxvm.org/ > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > > For more information on Linux on System z, visit > > http://wiki.linuxvm.org/ > > > > > > -- > Best regards > > Florian Bilek > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > -- Best regards Florian Bilek ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
