Hi All,
Could you, please, help me define vswitch for linuxes AND z/VM TCPIP.
At first, i created all tcp/ip configuration with 'ipwizard' and real OSA
addresses and it worked fine. Now, i would like to move to VSWITCH.
The OSA is 010, i made the following changes in system config:
DEFINE VSWITCH VSW1 RDEV 010
MODIFY VSWITCH VSW1 GRANT TCPIP
for user TCPIP:
NICDEF 600 TYPE QDIO LAN SYSTEM VSW1
I also changed TCPIP PROFILE accordingly
DEVICE d...@0600 OSD 0600 NONROUTER
LINK ETH0 QDIOETHERNET d...@0600 MTU 1500 IP
BUT, my concern is file SYSTEM DTCPARMS:
:nick.TCPIP :type.server
:class.stack
:ATTACH.0600-0602
During IPL, TCPIP tries to attach device 0600, fails and stop working.
TCP:
NIC 0600 is created; devices 0600-0602 defined
z/VM Version 6 Release 1.0, Service Level 0000 (64-bit),
<skip>
DTCRUN1022I Console log will be sent to default owner ID: TCPMAINT
HCPCPS040E Device 0600 does not exist
DTCRUN1001E "CP VARY ON 0600-0602" failed with return code 40
DTCRUN1099E Server not started - correct problem and retry
DTCRUN1019I Server will not be logged off because you are connected
This is controller:
q vswitch
VSWITCH SYSTEM VSW1 Type: VSWITCH Connected: 0 Maxconn: INFINITE
PERSISTENT RESTRICTED NONROUTER Accounting: OFF
VLAN Unaware
MAC address: 02-00-01-00-00-01
State: Ready
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
RDEV: 0010.P00 VDEV: 0010 Controller: DTCVSW1
Ready; T=0.01/0.01 11:11:12
Thank you.
WBR, Sergey
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
