Hi All, I have a little problem. I'm intalling SLESL11SP1 under VM, as an instruction, i use DRAFT redbook (The Virtualization Cookbook for SLES 11 SP1). I changed parmfile for my system, but i use FTP as an install source:
INSTALL=ftp://ibmsys3:[email protected]/image/ under "image" directory i have mounted dvd.iso. So, the actual problem is that the automated install doesn't work :) qeth.184d8a: 0.0.0600: Broadcast enabled qeth.dac2aa: 0.0.0600: Using SW checksumming on eth0. qeth.9c4c89: 0.0.0600: Outbound TSO not supported on eth0 *** Could not find the SUSE Linux Enterprise Server 11 Repository. Activating manual setup program. >>> Linuxrc v3.3.59 (Kernel 2.6.32.12-0.7-default) <<< However, if i continue manual install, all "default" values are taken from my parmfile (i just enter the password again) and, as far as i see, the install source is found: 3% 74% 75% 76% 77% 78% 79% 80% 81% 82% 8 3% 84% 85% 86% 87% 88% 89% 90% 91% 92% 9 3% 94% 95% 96% 97% 98% 99% 100% Loading Installation System (6/6) (27 kB) - 15% 26% 47% 57% 68% 94% 100% Reading Driver Update... No new Driver Updates found Select the display type. 1) X11 2) VNC 3) SSH 4) ASCII Console So, does anyone have the same problem? Thank you. WBR, Sergey ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
