Rogério, That's our latest Ficon Express 8 code. I'm not sure which level of sles 10 is required for z196. If you are up to date with sles, I think it is time to open a support request.
Regards, Ray Higgs System z FCP Development Bld. 706, B42 2455 South Road Poughkeepsie, NY 12601 (845) 435-8666, T/L 295-8666 [email protected] Linux on 390 Port <[email protected]> wrote on 04/05/2011 07:22:50 PM: > From: Rogério Soares <[email protected]> > To: [email protected] > Date: 04/05/2011 07:27 PM > Subject: Re: read-only > Sent by: Linux on 390 Port <[email protected]> > > I already see this today, all avaiable mcls are applyed, > > we are running a z196 system with z/vm 6.1 by the waw.. thansks for any > support Ray. :) > > orap103:~ # lszfcp -a -b 0.0.1734 > 0.0.1734 host1 > Bus = "ccw" > availability = "good" > card_version = "0x0005" > cmb_enable = "0" > cutype = "1731/03" > devtype = "1732/03" > failed = "0" > hardware_version = "0x00000000" > in_recovery = "0" > lic_version = "0x0000010e" > modalias = "ccw:t1731m03dt1732dm03" > online = "1" > peer_d_id = "0x000000" > peer_wwnn = "0x0000000000000000" > peer_wwpn = "0x0000000000000000" > status = "0x5400082e" > Class = "fc_host" > maxframe_size = "2112 bytes" > node_name = "0x5005076400c660b6" > permanent_port_name = "0xc05076eaab805421" > port_id = "0x019e81" > port_name = "0xc05076eaab801990" > port_type = "NPort (fabric via point-to-point)" > serial_number = "IBM820000000660B6" > speed = "4 Gbit" > supported_classes = "Class 2, Class 3" > supported_speeds = "1 Gbit, 4 Gbit" > tgtid_bind_type = "wwpn (World Wide Port Name)" > Class = "scsi_host" > cmd_per_lun = "1" > host_busy = "0" > proc_name = "zfcp" > queue_full = "1142 7103943361" > sg_tablesize = "538" > state = "running" > unchecked_isa_dma = "0" > unique_id = "1" > utilization = "0 0 0" > > orap103:~ # > > > > > On Tue, Apr 5, 2011 at 8:17 PM, Raymond Higgs <[email protected]> wrote: > > > Linux on 390 Port <[email protected]> wrote on 04/05/2011 02:51:09 > > PM: > > > > > From: Rogério Soares <[email protected]> > > > To: [email protected] > > > Date: 04/05/2011 02:55 PM > > > Subject: read-only > > > Sent by: Linux on 390 Port <[email protected]> > > > > > > Listeners, i still looking for solutions for read-only, i found a lot of > > > this errros on messages... there is a way to find why the adapters is > > > resetting? i can't find any valueable information.. i already see for > > > storage problems, san problems... update kernel, lvm package and > > multipath > > > too... ... any tip to debug this error? i'm using sles10 sp3, but get > > this > > > error with sp1 too... > > > > > > > > > warn-20110324.bz2:Mar 23 16:40:51 orap103 kernel: zfcp: resetting unit > > > 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 16:40:51 orap103 kernel: zfcp: host/bus reset > > > because of problems with unit 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 16:40:52 orap103 kernel: zfcp: The adapter > > 0.0.1734 > > > reported the following characteristics: > > > warn-20110324.bz2:Mar 23 16:40:52 orap103 kernel: zfcp: Switched fabric > > > fibrechannel network detected at adapter 0.0.1734. > > > warn-20110324.bz2:Mar 23 16:40:52 orap103 kernel: zfcp: port erp failed > > > (adapter 0.0.1734, wwpn=0x500507630a0b0485) > > > warn-20110324.bz2:Mar 23 16:54:14 orap103 kernel: zfcp: resetting unit > > > 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 16:54:14 orap103 kernel: zfcp: host/bus reset > > > because of problems with unit 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 16:54:15 orap103 kernel: zfcp: The adapter > > 0.0.1734 > > > reported the following characteristics: > > > warn-20110324.bz2:Mar 23 16:54:15 orap103 kernel: zfcp: Switched fabric > > > fibrechannel network detected at adapter 0.0.1734. > > > warn-20110324.bz2:Mar 23 16:54:15 orap103 kernel: zfcp: port erp failed > > > (adapter 0.0.1734, wwpn=0x500507630a0b0485) > > > warn-20110324.bz2:Mar 23 17:00:05 orap103 kernel: zfcp: resetting unit > > > 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 17:00:05 orap103 kernel: zfcp: resetting unit > > > 0x4071405300000000 > > > warn-20110324.bz2:Mar 23 17:00:05 orap103 kernel: zfcp: host/bus reset > > > because of problems with unit 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 17:00:06 orap103 kernel: zfcp: The adapter > > 0.0.1734 > > > reported the following characteristics: > > > warn-20110324.bz2:Mar 23 17:00:06 orap103 kernel: zfcp: Switched fabric > > > fibrechannel network detected at adapter 0.0.1734. > > > warn-20110324.bz2:Mar 23 17:00:06 orap103 kernel: zfcp: port erp failed > > > (adapter 0.0.1734, wwpn=0x500507630a0b0485) > > > warn-20110324.bz2:Mar 23 18:43:09 orap103 kernel: zfcp: resetting unit > > > 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 18:43:09 orap103 kernel: zfcp: host/bus reset > > > because of problems with unit 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 18:43:10 orap103 kernel: zfcp: The adapter > > 0.0.1734 > > > reported the following characteristics: > > > warn-20110324.bz2:Mar 23 18:43:10 orap103 kernel: zfcp: Switched fabric > > > fibrechannel network detected at adapter 0.0.1734. > > > warn-20110324.bz2:Mar 23 18:43:10 orap103 kernel: zfcp: port erp failed > > > (adapter 0.0.1734, wwpn=0x500507630a0b0485) > > > warn-20110324.bz2:Mar 23 18:47:02 orap103 kernel: zfcp: resetting unit > > > 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 18:47:02 orap103 kernel: zfcp: host/bus reset > > > because of problems with unit 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 18:47:03 orap103 kernel: zfcp: The adapter > > 0.0.1734 > > > reported the following characteristics: > > > warn-20110324.bz2:Mar 23 18:47:03 orap103 kernel: zfcp: Switched fabric > > > fibrechannel network detected at adapter 0.0.1734. > > > warn-20110324.bz2:Mar 23 18:47:03 orap103 kernel: zfcp: warning: failed > > > gid_pn nameserver request for wwpn 0x500507630a0b0485 for adapter > > 0.0.1734 > > > warn-20110324.bz2:Mar 23 18:47:03 orap103 kernel: zfcp: port erp failed > > > (adapter 0.0.1734, wwpn=0x500507630a0b0485) > > > warn-20110324.bz2:Mar 23 18:50:21 orap103 kernel: zfcp: resetting unit > > > 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 18:50:21 orap103 kernel: zfcp: host/bus reset > > > because of problems with unit 0x4070405c00000000 > > > warn-20110324.bz2:Mar 23 18:50:22 orap103 kernel: zfcp: The adapter > > 0.0.1734 > > > reported the following characteristics: > > > warn-20110324.bz2:Mar 23 18:50:22 orap103 kernel: zfcp: Switched fabric > > > fibrechannel network detected at adapter 0.0.1734. > > > warn-20110324.bz2:Mar 23 18:50:22 orap103 kernel: zfcp: port erp failed > > > (adapter 0.0.1734, wwpn=0x500507630a0b0485) > > > warn-20110324.bz2:Mar 24 18:32:28 orap103 kernel: zfcp: resetting unit > > > 0x4070405c00000000 > > > warn-20110324.bz2:Mar 24 18:32:28 orap103 kernel: zfcp: host/bus reset > > > because of problems with unit 0x4070405c00000000 > > > warn-20110324.bz2:Mar 24 18:32:29 orap103 kernel: zfcp: The adapter > > 0.0.1734 > > > reported the following characteristics: > > > warn-20110324.bz2:Mar 24 18:32:29 orap103 kernel: zfcp: Switched fabric > > > fibrechannel network detected at adapter 0.0.1734. > > > warn-20110324.bz2:Mar 24 18:32:29 orap103 kernel: zfcp: port erp failed > > > (adapter 0.0.1734, wwpn=0x500507630a0b0485) > > > warn-20110324.bz2:Mar 24 18:41:07 orap103 kernel: zfcp: resetting unit > > > 0x4070405c00000000 > > > warn-20110324.bz2:Mar 24 18:41:07 orap103 kernel: zfcp: host/bus reset > > > because of problems with unit 0x4070405c00000000 > > > warn-20110324.bz2:Mar 24 18:41:08 orap103 kernel: zfcp: The adapter > > 0.0.1734 > > > reported the following characteristics: > > > warn-20110324.bz2:Mar 24 18:41:08 orap103 kernel: zfcp: Switched fabric > > > fibrechannel network detected at adapter 0.0.1734. > > > warn-20110324.bz2:Mar 24 18:41:08 orap103 kernel: zfcp: port erp failed > > > (adapter 0.0.1734, wwpn=0x500507630a0b0485) > > > warn-20110324.bz2:Mar 24 18:41:55 orap103 kernel: zfcp: bug: No > > > recommendation could be given for aproblem on the adapter 0.0.1734 > > Stopping > > > all operations on this adapter. <6>sd 0:0:0:0: SCSI error: return code = > > > 0x00070000 > > > > > > Rogério, > > > > I've fixed 1 or 2 of these "host/bus reset" problems in firmware. I'd > > like to see the output of lszfcp -a -b 0.0.1734 to see lic_version. > > Hopefully, you just need the latest FCP MCLs. > > > > Regards, > > > > Ray Higgs > > System z FCP Development > > Bld. 706, B42 > > 2455 South Road > > Poughkeepsie, NY 12601 > > (845) 435-8666, T/L 295-8666 > > [email protected] > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > > For more information on Linux on System z, visit > > http://wiki.linuxvm.org/ > > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
