On 20.04.2011 20:21, Patrick Finnegan wrote:
I have a couple of 3270-mode terminals locally attached via a 3174-21L
on my z890 running Debian/Squeeze in an LPAR.
According to the 3270 terminal driver documentation, I should be able to
enter ctrl-C, ctrl-D, etc, using ^C or ^D. I can successfully do this
from the SE/HMC console window.
Looking at drivers/s390/char/defkeymap.map, I see the following definitions:
control keycode 107 = Control_z # PA3
control keycode 108 = Control_c # PA1
control keycode 110 = Control_d # PA2
The comments suggest that pressing the PA1 key will generate Control-C,
PA2 Control-D and PA3 Control-Z. Have you tried using these keys instead
of the ^C sequence?
Regards,
Peter Oberparleiter
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
