Alan, (my doubt) On each virtual machine we need configure on /etc/sysconfig/network-scripts/ifcfg-eth0 the MTU=8192, to allow JumboFrames on Linux, right?
Regards, Fernando 2011/11/9 Alan Altmark <[email protected]> > On Wednesday, 11/09/2011 at 12:19 EST, "Martin, Terry R. (CMS/CTR) (CTR)" > <[email protected]> wrote: > > We just set up a 10GB OSA network and we are planning to use Jumbo > Frames. Is > > there anything that I need to do on the VSWITCH to allow for Jumbo Frame > > transfers ? > > No, there's nothing to configure. > > Alan Altmark > > Senior Managing z/VM and Linux Consultant > IBM System Lab Services and Training > ibm.com/systems/services/labservices > office: 607.429.3323 > mobile; 607.321.7556 > [email protected] > IBM Endicott > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
