I'm not all that familiar with RH, but chshut from s390-tools package is there, right?
We have /usr/sbin/chshut poff vmcmd "LOGOFF" run has server startup time. $ chshut -h Usage: chshut TRIGGER ACTION [COMMAND] [OPTIONS] Change action to be performed after shutdown. TRIGGER specifies when the action is performed: halt System has been shut down (e.g. shutdown -h -H now) poff System has been shut down for power off (e.g. shutdown -h -P now) reboot System has been shut down for reboot (e.g. shutdown -r) Note: Depending on the distribution, "halt" might be mapped to "poff". ACTION specifies the action to be performed: ipl IPL with previous settings reipl IPL with re-IPL settings (see chreipl) stop Stop all CPUs vmcmd Run z/VM CP command defined by COMMAND COMMAND defines the z/VM CP command to issue. OPTIONS: -h, --help Print this help, then exit -v, --version Print version information, then exit -----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Hodge, Robert L Sent: Thursday, August 15, 2013 9:22 AM To: [email protected] Subject: Re: [LINUX-390] Rhel 6.4 signal shutdown not working. I have the following in "/etc/init/control-alt-delete.conf" and it works as a halt, not a restart. start on control-alt-delete exec /sbin/shutdown -r now "Control-Alt-Delete pressed" -----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Barnett, James K Sent: Thursday, August 15, 2013 9:56 AM To: [email protected] Subject: EXTERNAL: Rhel 6.4 signal shutdown not working. Hello Listers, I am working on upgrading our gold image from V5.8 to V6.4. One of the issues I have hit is that I think I have everything set up to handle a signal shutdown, but the 6.4 instance does not acknowledge that it has been received. I have set up signal On the VM side: signal is enabled for the guest ID, and when issued, shows the signal in process: 08:44:29 JBARNE8 0043 VMYINI0019R Enter: q signals 08:44:29 JBARNE8 0043 Signalled Timeout 08:44:29 JBARNE8 0043 Userid Signal Signal Status By Remaining 08:44:29 JBARNE8 0043 MFSL8009 SHUTDOWN Enabled - - 08:54:13 JBARNE8 0045 Signalled Timeout 08:54:13 JBARNE8 0045 Userid Signal Signal Status By Remaining 08:54:13 JBARNE8 0045 MFSL8009 SHUTDOWN Processing OPERATOR 893 If I let it timeout, it will force the mfsl8009 userid. On the linux side: I have updated /etc/init/control-alt-delete.conf changing the r to h. start on control-alt-delete exec /sbin/shutdown -h now "Control-Alt-Delete pressed" Looking through console log and /var/log/messages and any other log I can think of, I never see any sign of the signal being received. I am probably missing something obvious, but not sure what it is. All V5 linux systems shutdown without problem when signaled. Any ideas? Jim Barnett z/VM and zLinux United Health Technologies 763-744-3066 [email protected] This e-mail, including attachments, may include confidential and/or proprietary information, and may be used only by the person or entity to which it is addressed. If the reader of this e-mail is not the intended recipient or his or her authorized agent, the reader is hereby notified that any dissemination, distribution or copying of this e-mail is prohibited. If you have received this e-mail in error, please notify the sender by replying to this message and delete this e-mail immediately. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
