We install a couple of EC12 to our shop, upgrade some server to SLES 11 SP3 kernel 3.0.101-0.15-default under z/VM 6.2. When we execute the VMRELOCATE for some reason the SAN file system go read only. Our previous configuration was an EC10, SLES 10 SP2 under z/VM 6.2. The VMRELOCATE here works fine. Does anyone see this issue before? The SAN is an IBM V7000. The Storage, Unix and DBA groups said their configurations are ok.
Regards, Victor Echavarry System Programmer, EVERTEC LLC WARNING: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete it immediately. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of EVERTEC, Inc. or its affiliates. Finally, the integrity and security of this message cannot be guaranteed on the Internet, and as such EVERTEC, Inc. and its affiliates accept no liability for any damage caused by any virus transmitted by this email. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
