While your statement is technically correct, it is best to use 500 as the mdisk with RSU's, ptf's, etc. That being said, the user should move 500 to a larger area, some place with approx. 1500 cylinders. Steve
-----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Mauro Souza Sent: Monday, November 17, 2014 4:01 PM To: [email protected] Subject: Re: Ran out of space when applying RSU You can put the RSU file anywhere you want, it don't need to be on 500. On Mon, Nov 17, 2014, 18:46 Dave Jones <[email protected]> wrote: > Hi, Ray. > > Have you already applied the 630RSU1 to the system? If you have, then > you can delete it from the 500 mdisk. > > Have a good one, too. > > DJ > > On 11/17/2014 02:29 PM, Chu, Raymond wrote: > > Hi, > > > > This is the first time to apply RSU after having a z/VM SSI Cluster > > system successfully built. When I logged on as maint630 and ran > > several commands as shown below: > > > > q disk LABEL VDEV M STAT CYL TYPE BLKSZ FILES BLKS USED-(%) > > BLKS LEFT BLK TOTAL MNT191 191 A R/W 175 3390 4096 36 > > 242-01 31258 31500 MNT5E6 5E6 B R/W 9 3390 4096 > > 134 1304-80 316 1620 MNT500 500 C R/W 1200 > > 3390 4096 1 97057-45 118943 216000 MNT51D 51D D > > R/W 26 3390 4096 297 1823-39 2857 4680 > > PMT551 551 E R/W 40 3390 4096 10 119-02 7081 > > 7200 MNT190 190 S R/O 207 3390 4096 696 18085-49 > > 19175 37260 MNT19E 19E Y/S R/O 500 3390 4096 1124 > > 30404-34 59596 90000 Ready; T=0.01/0.01 20:16:42 > > > > listf * * c 6302RSU1 SERVLINK C1 > > > > The Maint630.500 has already been 45% full. I uploaded just one RSU > > (RPTF01 servlink) and both of them occupied 79% full. Attempted to > > run this "deterse RPTF01 SERVLINK C = = = (replace" command and the > > disk 500 was full. > > > > I would like to know whether the 630RSU1 servlink file can be > > deleted to free up more space for detersing. Thanks, Ray > > > > > > > > ----------------------------------------- The information contained > > in this e-mail, including any attachment(s), is intended solely for > > use by the named addressee(s). If you are not the intended > > recipient, or a person designated as responsible for delivering such > > messages to the intended recipient, you are not authorized to > > disclose, copy, distribute or retain this message, in whole or in > > part, without written authorization from PSEG. This e-mail may > > contain proprietary, confidential or privileged information. If you > > have received this message in error, please notify the sender > > immediately. This notice is included in all e-mail messages leaving > > PSEG. Thank you for your cooperation. > > > > -------------------------------------------------------------------- > > -- > > > > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [email protected] with the message: INFO > > LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 > > -------------------------------------------------------------------- > > -- > > > > > For more information on Linux on System z, visit > > http://wiki.linuxvm.org/ > > > > -- > Dave Jones > V/Soft Software > www.vsoft-software.com > Houston, TX > 281.578.7544 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
