Hi, I have been following the Red book to start creating the LDXADMIN. Below are the definition and configuration for the LDXADMIN
* PROFILE LNXDFLT COMMAND SET VSWITCH VSWXXXX1 GRANT &USERID COMMAND DEFINE NIC 600 TYPE QDIO COMMAND COUPLE 600 TO SYSTEM VSWXXXX1 * COMMAND SET VSWITCH VSWXXXX2 GRANT &USERID COMMAND DEFINE NIC 650 TYPE QDIO COMMAND COUPLE 650 TO SYSTEM VSWXXX2 * CPU 00 BASE CPU 1 IPL CMS MACHINE ESA 8 IUCV ALLOW OPTION CHPIDV ONE CONSOLE 009 3215 T SPOOL 000C 2540 READER * SPOOL 000D 2540 PUNCH A SPOOL 000E 1403 A LINK MAINT 0190 0190 RR LINK MAINT 019D 019D RR LINK MAINT 019E 019E RR LINK LNXMAINT 0192 0191 RR LINK TCPMAINT 0592 0592 RR * *----------------------------------------------------------- IDENTITY LNXADMIN AAAXXX 256M 1G BG INCLUDE LNXDFLT BUILD ON N1 USING SUBCONFIG LNXADM-1 BUILD ON A1 USING SUBCONFIG LNXADM-2 BUILD ON A2 USING SUBCONFIG LNXADM-3 BUILD ON M1 USING SUBCONFIG LNXADM-4 OPTION LNKNOPAS SUBCONFIG LNXADM-1 MDISK 0100 3390 0001 10016 VM1091 MR AAAXXX AAAXXX AAAXXX MDISK 0101 3390 1201 10016 VM1A0C MR AAAXXX AAAXXX AAAXXX SUBCONFIG LNXADM-2 MDISK 0100 3390 0001 10016 VM1525 MR AAAXXX AAAXXX AAAXXX MDISK 0101 3390 0001 10016 VM1526 MR AAAXXX AAAXXX AAAXXX SUBCONFIG LNXADM-3 MDISK 0100 3390 0001 10016 VM149E MR AAAXXX AAAXXX AAAXXX MDISK 0101 3390 0001 10016 VM149F MR AAAXXX AAAXXX AAAXXX SUBCONFIG LNXADM-4 MDISK 0100 3390 0001 10016 VM1527 MR AAAXXX AAAXXX AAAXXX MDISK 0101 3390 0001 10016 VM1528 MR AAAXXX AAAXXX AAAXXX * When I logon as LNXADMIN, the highlighted message appears. LOGON LNXADMIN 00: HCPLNM1151E LNXADMIN 0101 has not been linked because it is not within CP volume extents. 00: z/VM Version 6 Release 3.0, Service Level 1401 (64-bit), 00: built on IBM Virtualization Technology 00: There is no logmsg data 00: FILES: NO RDR, NO PRT, NO PUN 00: LOGON AT 00:45:45 UTC FRIDAY 11/21/14 00: Command complete 00: NIC 0600 is created; devices 0600-0602 defined 00: NIC 0600 is connected to VSWITCH SYSTEM VSWXXXX1 00: Command complete 00: NIC 0650 is created; devices 0650-0652 defined 00: NIC 0650 is connected to VSWITCH SYSTEM VSWXXXX2 z/VM V6.3.0 2014-11-18 15:35 DMSACP723I A (191) R/O DMSACP723I C (592) R/O DIAG swap disk defined at virtual address 300 (64988 4K pages of swap space) DIAG swap disk defined at virtual address 301 (129980 4K pages of swap space) Do you want to IPL Linux from minidisk 100? y/n N I do a query on the disk and it is attached to the system Q 1A0C 00: DASD 1A0C CP SYSTEM VM1A0C 1 Ready; T=0.01/0.01 00:46:57 I do not see how and what caused the issue. Please advise. I know when I formatted the minkdisk, I entered the following: PERM 1-END END Is it enough to cause the issue? Thanks, Ray ----------------------------------------- The information contained in this e-mail, including any attachment(s), is intended solely for use by the named addressee(s). If you are not the intended recipient, or a person designated as responsible for delivering such messages to the intended recipient, you are not authorized to disclose, copy, distribute or retain this message, in whole or in part, without written authorization from PSEG. This e-mail may contain proprietary, confidential or privileged information. If you have received this message in error, please notify the sender immediately. This notice is included in all e-mail messages leaving PSEG. Thank you for your cooperation. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
