On Friday, 01/16/2015 at 09:49 EST, Ron Wells <[email protected]> wrote: > Found the following that was incorrect...or modified from original 5.4 > setup..person that set this up no longer here. > :nick.TCPIP :type.server > :class.stack > :ATTACH.F800-F80F,F900-F90F >>>>>>>>>>>>> This line was > not in setup > > once I put that ATTACH inplace it came up.. BUT... > > q vswitch display shows following differences and do not understand why... > > RDEV: F804.P00 VDEV: F804 Controller DTCPVSW2 >> old display from 5.4 > system > > RDEV: F804.P00 VDEV: 0600 >> ??????? the difference is 0600 vs F804 do > not know why/reason
Ron, your post is confusing. If you're using a VSWITCH for TCPIP, then there is no :ATTACH tag in SYSTEM DTCPARMS. Instead you have a NICDEF in the user directory. Maybe the OSAs are being kept offline at IPL and this is simply a way to fix that? If so, fix your SYSTEM CONFIG to have the OSAs online at IPL. The :Attach. tage will VARY ON the specified devices which is why it starts working. But I'll bet you get errors on the TCPIP console when it tries to ATTACH them to TCPIP. Hopefully "DTCPVSW2" is a typo. Alan Altmark Senior Managing z/VM and Linux Consultant Lab Services System z Delivery Practice IBM Systems & Technology Group ibm.com/systems/services/labservices office: 607.429.3323 mobile; 607.321.7556 [email protected] IBM Endicott ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
