I have the following problem when I try to provision. I used to be able to do this, but I managed to zap some xCAT tables and am starting from scratch again.
Thanks. sl11d130: Adding a disk to SL11D130's directory entry... Done sl11d130: Adding 3390 disk for sl11d130 as 100 ... Done Operating system for sl11d130 set sl11d130: Searching for acceptable network device sl11d130: Setting up networking on XCATVSW2 (layer:2 | DHCP:0) sl11d130: (Error) Missing network information sl11d130: (Solution) Specify the mask, gateway, and nameservers for the subnet in the networks table netname netmask mgtifname gateway dhcpserver tftpserver nameserversntpserverslogserversdynamicrangestaticrangestaticrangeincrementnodehostnameddnsdomainvlaniddomaincommentsdisabl 10_10_10_0-255_255_255_0 10.10.10.0 255.255.255.0 eth1 10.10.10.10 172_17_50_0-255_255_254_0 172.17.50.0 255.255.254.0 eth0 172.17.50.1 172.17.51.121 Showing 1 to 2 of 2 entries USER SL11D130 XCAT 2G 2G G INCLUDE SUSE CPU 00 MACHINE ESA CONSOLE 0009 3215 T NICDEF 0A00 TYPE QDIO LAN SYSTEM XCATVSW2 MACID FFFFED SPOOL 000C 2540 READER * SPOOL 000D 2540 PUNCH A SPOOL 000E 1403 A MDISK 0100 3390 1 5000 XCLX08 MR ALL ALL ALL PROFILE SUSE COMMAND SET VSWITCH XCATVSW2 GRANT &USERID COMMAND COUPLE 0A00 TO SYSTEM XCATVSW2 COMMAND SET OBSERVER OPERATOR CPU 00 IPL CMS PARM AUTOCR MACH ESA 2 OPTION APPLMON ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
