Troy,
You'll probably need to run FORMSSI to rebuild the PDR.

You'll need the whole cluster down to rebuild the PDR.  Either bring one member 
up in REPAIR mode to make the change, or access the PDR volume from a system 
that is outside of the cluster.  I expect that changing the SSI name in SYSTEM 
CONFIG requires the whole cluster to be down, too.

                                                                                
                                                            Dennis O'Brien

"I'll tell you what--we're having an earth--"  -- Al Michaels, broadcasting 
Game 3 of the World Series, before the feed was cut by the Loma Prieta 
earthquake, 17 Oct 1989


-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Troy 
Slaughter
Sent: Wednesday, October 21, 2015 11:20
To: [email protected]
Subject: Changing SSI cluster name on z/VM

I, once, ran across some "use at your own risk" steps to change the SSI cluster 
name of a z/VM system.  I can't seem to locate them now.  Does anyone know how 
to do this?

Steps I do know.

Change OWNER info for those volume that have SSI specified..(spool, page...)
Update SYSTEM CONFIG file with new SSI name.

There was a few other steps that escape me.

[cid:_2_0A7184240A7181B80054F44C86257CBE]
_______________________________________________________________________________
Troy Slaughter | Software Consultant | Enterprise Enablement
50 South Lasalle Street, LQ 18SW, Chicago, Illinois, 60603 | Phone 312-557-6322 
| Cell 312-208-3735 | [email protected] <mailto:[email protected]>
Please visit northerntrust.com<http://www.northerntrust.com/>
CONFIDENTIALITY NOTICE: This communication is confidential, may be privileged 
and is meant only for the intended recipient. If you are not the intended 
recipient, please notify the sender ASAP and delete this message from your 
system.                      NTAC:3NS-20

P Please consider the environment before printing this e-mail.


----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

----------------------------------------------------------------------
This message, and any attachments, is for the intended recipient(s) only, may 
contain information that is privileged, confidential and/or proprietary and 
subject to important terms and conditions available at 
http://www.bankofamerica.com/emaildisclaimer.   If you are not the intended 
recipient, please delete this message.

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Reply via email to